• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Sony VFETs 2SK82 and 2SJ28 matches needed

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi DIYAUDIO Ladies and Gentlemen. Update, did some local swapping and now have some new matches and mis-matches. See below:

I am trying to build Nelson Pass version of the Sony VFET Amplifier using two or three output pairs per channel.

We have some Sony VFETs 2SK82 (6) and 2SJ28 (4) that need matches, as the title says.

My hope is that others have a quantity of mismatches also. Maybe we can trade to get closer matches. I am not looking to sell these, at least not yet.

PM me with what you have and what you need.

Could traded a couple of 2SK82s for 2SJ28s in the needed Vgs.

Not in the list below, buy need: 2SJ28 one in 9.0 and one 10.0 Vgs.

Not in the list below, buy need: 2SJ82 one in 7.9 and one 7.7 - 7.8 Vgs.

If there is another way to do these matching swaps, let me know that too.

I tested at 20 volts, 1 ohm resistor for Vgs using the attached Schematic.

Here is our new mis-match list:
Tested at 20 volts, 1 ohm resistor for Vgs
Part Code Vgs
2SK82 KD33 6.09 Rush
2SK82 KD33 6.94 Rush
2SK82 KE33 9.03 Rush
2SK82 HA66 10.95 Rush
2SK82 KE33 8.45 Jon> These two are pretty close, but, if we can match closer???
2SK82 KF33 8.6 Jon>

2SJ28 KE33 7.51 Jon
2SJ28 KE33 8.32 Jon
2SJ28 KE33 11.00 Jon
2SJ28 HA66 11.67 Jon
 

Attachments

  • Sony VFET Testing setup.jpg
    Sony VFET Testing setup.jpg
    519 KB · Views: 779
Last edited:
Sony VFETs 2SK82 / 2SJ28 matches to trade

Hi DIYAUDIO guys.

I am trying to build Nelson Pass version of the Sony VFET Amplifier using two or three output pairs per channel.
I have some Sony VFETs 2SK82 (4) and 2SJ28 (4) that need matches, as the title says.

My hope is that others have a quantity of mismatches also. Maybe we can trade to get closer matches. I am not looking to sell these, at least not yet. I do have some other Sony VFETs so I might be interested in trading for other values of Vgs as well. PM me with what you have and what you need.
If there is another way to do these matching swaps, let me know that too.

I tested at 20 volts, 1 ohm resistor for Vgs using the attached Schematic.

Here is my mismatch list:
Part Code Vgs
2SK82 HA66 10.95
2SK82 KE33 8.45
2SK82 KD33 6.94
2SK82 KD33 6.09

2SJ28 HA66 11.67
2SJ28 KE33 11
2SJ28 KE33 9.95
2SJ28 KE33 8.89

Bump.
 
Bump

Hi DIYAUDIO Ladies and Gentlemen. Update, did some local swapping and now have some new matches and mis-matches. See below:

I am trying to build Nelson Pass version of the Sony VFET Amplifier using two or three output pairs per channel.

We have some Sony VFETs 2SK82 (6) and 2SJ28 (4) that need matches, as the title says.

My hope is that others have a quantity of mismatches also. Maybe we can trade to get closer matches. I am not looking to sell these, at least not yet.

PM me with what you have and what you need.

Could traded a couple of 2SK82s for 2SJ28s in the needed Vgs.

Not in the list below, buy need: 2SJ28 one in 9.0 and one 10.0 Vgs.

Not in the list below, buy need: 2SJ82 one in 7.9 and one 7.7 - 7.8 Vgs.

If there is another way to do these matching swaps, let me know that too.

I tested at 20 volts, 1 ohm resistor for Vgs using the attached Schematic.

Here is our new mis-match list:
Tested at 20 volts, 1 ohm resistor for Vgs
Part Code Vgs
2SK82 KD33 6.09 Rush
2SK82 KD33 6.94 Rush
2SK82 KE33 9.03 Rush
2SK82 HA66 10.95 Rush
2SK82 KE33 8.45 Jon> These two are pretty close, but, if we can match closer???
2SK82 KF33 8.6 Jon>

2SJ28 KE33 7.51 Jon
2SJ28 KE33 8.32 Jon
2SJ28 KE33 11.00 Jon
2SJ28 HA66 11.67 Jon

Bump
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.