This is a cheap Chinese DAC board. Possibly a good project for customizing upgrading if you have the knowledge and skill.
$20 paypal includes shipping to lower 48 US states.
Takes a 15v DC power supply which is not included. Or can use a +15/-15 power supply if you unsolder the jumper just behind the power plug.
It doesn't come with any instructions but jumper J1 and J2 select the input (coax or optical) and J3-J5 select the filter but I haven't found anything saying which filter is which jumper settings.
$20 paypal includes shipping to lower 48 US states.
Takes a 15v DC power supply which is not included. Or can use a +15/-15 power supply if you unsolder the jumper just behind the power plug.
It doesn't come with any instructions but jumper J1 and J2 select the input (coax or optical) and J3-J5 select the filter but I haven't found anything saying which filter is which jumper settings.
Attachments
Check the eBay-listings for the board (search for ES9038) as quite a few of them include a picture that shows jumper settingsI haven't found anything saying which filter is which jumper settings.
Isn't this thread ES9038Q2M Board all about this board?
This is a 9028 but it may also cover it. I bought it with the intention of researching and improving it and then realized I just wasn't that interested in doing all of that.
One person PM'd in front of you DIMDAS but if they fall through I will let you know.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.