• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Lots of boards

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Ok, so as part of clearing out my DIY wares, I came upon a large stack of boards I've collected and not used. I don't remember what they cost, just make me a reasonable offer.

  1. Description QTY
  2. Rowen Audio rPSU5 v1.0 1
  3. Noval experimenter's board 1
  4. Octal experimenter's board 1
  5. Pos/Neg Regulators by Jens Rasmussen 2006 6 W/ 6 Kits for the regulators

    no kits for any other boards except the Jens Reg boards
 

Attachments

  • 20181118_144756.jpg
    20181118_144756.jpg
    329.3 KB · Views: 693
  • 20181118_144745.jpg
    20181118_144745.jpg
    361.4 KB · Views: 701
  • 20181118_144730.jpg
    20181118_144730.jpg
    366.3 KB · Views: 684
  • 20181118_144851.jpg
    20181118_144851.jpg
    574 KB · Views: 181
  • 20181118_144844.jpg
    20181118_144844.jpg
    416.1 KB · Views: 191
  • 20181118_144806.jpg
    20181118_144806.jpg
    347.6 KB · Views: 658
  • 20181118_144719.jpg
    20181118_144719.jpg
    473.9 KB · Views: 673
  • 20181118_144821.jpg
    20181118_144821.jpg
    471.6 KB · Views: 227
  • 20181118_144709.jpg
    20181118_144709.jpg
    341 KB · Views: 230
Last edited:
So guys, the idea was to feed forward the karma by selling the boards cheaply, but I'd rather not do 2 here, 2 there as it takes more effort than it is worth for me. So make a bid on a lot of the boards, i.e. all six Aikido mono's, or a mixture of different types to make it as least a bit worth it.

Info on the Pinkmouse CCS boards.... a very nice writeup. https://www.vintage-radio.net/forum/attachment.php?attachmentid=118321&d=1452609619

I don't think I have the parts but all the parts are listed in the PDF.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.