Ok, in all seriousness, my days of DIY are long in the rearview mirror and I'd very much like to clean out space.
I probably have a lot more of this kind of thing in storage, but here in front of me is some stuff from a project never started surrounding the use of GM70 tubes most likely. Some from low DCR style power supplies.
I am trying to figure out pricing to make packing it up and shipping also worth the effort. Happier to bundle a few items.
Pricing is USD, pricing in CAD is *1.3, but I'll take either. Shipping extra, local sales appreciated.
I probably have a lot more of this kind of thing in storage, but here in front of me is some stuff from a project never started surrounding the use of GM70 tubes most likely. Some from low DCR style power supplies.
- 1x Hammond 166Q6 6.3vct @ 6A NIB $20
- pair of monster transmitter type chokes. 6hy, 300ma and 7kv test voltage, 35ohms! They weigh 16.5lbs each without packing. They are fully encased, hermetically sealed, but need a painting if you want to display them (I think the ceramic on one of the stems is cracked a bit and needs a little TLC but wouldn't effect function). $140/pr [Can't seem to locate them at the moment, they are somewhere in my storage...so pause on these until I find them]
- R80-44 R-Core transformer $25 [SEE Post #21 for pic]
(0-360-400)X2(50mA), 0-15(2A), 0-5(2A), 0-6.3X2(2A)
11.5(L)x9(W)x5(H)
Great for preamps
- 2x #military sealed 'FTR' filament transformers for the diode dampers, secondary is 6v @9amps, 111wv. [SEE Post #30 for pic]
- 4x 8Hy high current low DCR inductors from asia I bought a very long time ago, they are r-core or C-core by the looks of it. [SEE Post #31 for pics]
- Have one large R-Core Transformer for building a tube amp. R260-038 [SEE Post #15 for pic]
Dual 0/110/120V primaries, Dual 400V@200ma/360V/0V secondaries. 90V/90V@100ma, dual 2.5V/2.5V@2.5A, 0/5/6@4A, 3.15V/3.15V@4A. $60
I am trying to figure out pricing to make packing it up and shipping also worth the effort. Happier to bundle a few items.
Pricing is USD, pricing in CAD is *1.3, but I'll take either. Shipping extra, local sales appreciated.
Last edited:
Found another Triad C-47U in storage. Plus some more stuff.
Allied Elec. 6K7VG $60 usd
Hammond Manufacturing - Transformers - 6K7VG - TRANSFORMER; PRI:110-120V; 50/60HZ; 750VCT @150DCMA; 5V @3A; 6.3A @ 5.0A; LEADS - Allied Electronics & Automation
TRANSFORMER; PRI:110-120V; 50/60HZ; 750VCT @150DCMA; 5V @3A; 6.3A @ 5.0A; LEADS
Transcendar OPT pair $140 USD
3 K to 8 ohms
Frequency Response: 20 Hz to 100 kHz +/- 1 dB @ 1 Watt
Maximum DC Bias Current: 100 mA
Primary DC Resistance: 300 ohms
Primary Inductance: 20 H @ 120 Hz
Part Number: TT-010-OT
Transcendar Transformers - 10 Watt SE
A bundle of Russian 4P1L NOS wrapped in box, circa 16+
16+ x 6X9P-E NOS
16+ x 6C4P-EB NOS
6 GE Engr Sampl 6LW6 $100
4 GE 6LW6 + 1 Admiral (2 GEs and 1 Admiral are same construction as above Eng.Sampl. the other two are greyer plates and slightly different but close).
5x 6BY5GA $10
5x 6DQ5 $25
2x 6FW5 $8
2x 5Y3G (Syl + Silvertone)
6x Jan 6112
1x 83 $6
1x Philips 78
highest bid on:
24 0D3
4 0C3
1 0A3
1 0B3
2x CV4024
2x 6C33 $20
Allied Elec. 6K7VG $60 usd
Hammond Manufacturing - Transformers - 6K7VG - TRANSFORMER; PRI:110-120V; 50/60HZ; 750VCT @150DCMA; 5V @3A; 6.3A @ 5.0A; LEADS - Allied Electronics & Automation
TRANSFORMER; PRI:110-120V; 50/60HZ; 750VCT @150DCMA; 5V @3A; 6.3A @ 5.0A; LEADS
Transcendar OPT pair $140 USD
3 K to 8 ohms
Frequency Response: 20 Hz to 100 kHz +/- 1 dB @ 1 Watt
Maximum DC Bias Current: 100 mA
Primary DC Resistance: 300 ohms
Primary Inductance: 20 H @ 120 Hz
Part Number: TT-010-OT
Transcendar Transformers - 10 Watt SE
A bundle of Russian 4P1L NOS wrapped in box, circa 16+
16+ x 6X9P-E NOS
16+ x 6C4P-EB NOS
6 GE Engr Sampl 6LW6 $100
4 GE 6LW6 + 1 Admiral (2 GEs and 1 Admiral are same construction as above Eng.Sampl. the other two are greyer plates and slightly different but close).
5x 6BY5GA $10
5x 6DQ5 $25
2x 6FW5 $8
2x 5Y3G (Syl + Silvertone)
6x Jan 6112
1x 83 $6
1x Philips 78
highest bid on:
24 0D3
4 0C3
1 0A3
1 0B3
2x CV4024
2x 6C33 $20
Onetics FWB hybrid circuit B+ plate transformers (was planning to build the Karna PP300B amp) scrapping plans, but I do have the power supplies mostly laid out onto an aluminum baking tray ready to wire up.
2x #10216-A @ $198.70ea for 600 vac @220 ma, (orig price, looking for 0.6/$1)
2x #10216-B at 500 vac @ 220ma ac @ $198.70ea . (orig price, looking for 0.6/$1)
2x #military sealed 'FTR' filament transformers for the diode dampers, secondary is 6v @9amps, 111wv.
4x 8Hy high current low DCR inductors from asia I bought a very long time ago, they are r-core or C-core by the looks of it.
2x #10216-A @ $198.70ea for 600 vac @220 ma, (orig price, looking for 0.6/$1)
2x #10216-B at 500 vac @ 220ma ac @ $198.70ea . (orig price, looking for 0.6/$1)
2x #military sealed 'FTR' filament transformers for the diode dampers, secondary is 6v @9amps, 111wv.
4x 8Hy high current low DCR inductors from asia I bought a very long time ago, they are r-core or C-core by the looks of it.
42 6S4A Most is RCA, second is GE then some more random makes like Sylvania
10 5842 6x Raytheon Jan 5842WA, 4 Jan 5842 Amperex
4 5687 3x TS, 1x GE 5 Star
4 7044 GE
1 7199 Sylvania
20 6N6P
11 6H1P
8 6H30Pi
2 6922 EH Gold
3 6H23P
2 ECC81 Siemens
2 CV4024 Mullard
13 12B4A
34 12GN7A
15 12A4 mostly CBS Hytron, others GE
13 6CG7 +2 8CG7
4 EC91 6AQ4 RCA
8 6CB6A RCA
5 6T4 GE Sleeve
8 12HL7 Sylvania
10 6J52P
13 6FH5
8 EF184 GE
6GK5
3ER5
3A5
6CM7
3GK5
I am working out pricing, but just hit me up with what you are looking for and we can work it out. I am also taking photos of key tubes. I have a Hickok tester, so the spendier tubes can be tested, but I am not testing large lots.
I'm fishing more things out of my storage unit.
Edcor XPWR007 Sec: 550V@200ma, 6.3V@6a, 5V@3A $pending
R80-44 R-Core transformer $25
(0-360-400)X2(50mA), 0-15(2A), 0-5(2A), 0-6.3X2(2A)
11.5(L)x9(W)x5(H)
Great for preamps
I'll post pictures later or upon request (pm me your email in which case).
Edcor XPWR007 Sec: 550V@200ma, 6.3V@6a, 5V@3A $pending
R80-44 R-Core transformer $25
(0-360-400)X2(50mA), 0-15(2A), 0-5(2A), 0-6.3X2(2A)
11.5(L)x9(W)x5(H)
Great for preamps
I'll post pictures later or upon request (pm me your email in which case).
Last edited:
More boat anchor supplies...
I have a pair of monster transmitter type chokes. 6hy, 300ma and 7kv test voltage, 35ohms! They weigh 16.5lbs each without packing. They are fully encased, hermetically sealed, but need a painting if you want to display them (I think the ceramic on one of the stems is cracked a bit and needs a little TLC but wouldn't effect function). $140/pr
I have a pair of monster transmitter type chokes. 6hy, 300ma and 7kv test voltage, 35ohms! They weigh 16.5lbs each without packing. They are fully encased, hermetically sealed, but need a painting if you want to display them (I think the ceramic on one of the stems is cracked a bit and needs a little TLC but wouldn't effect function). $140/pr
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.