JFET matching Jig

[merlin el mago]

kinku exist a socket for the SMD FETs?

 

[kinku]

No socket available for SOT23 within reasonable price. These are for jumper , just as well can use a regular wire. But will leave option in PCB if anyone wants it to use real jumper.

 

[kinku]

some changes for another DIYer
for those orphan JFETs with weird pin outs. In my little brain it seems like cover every three pin Jfets out there( I understand the pins are reversible for source and drain)
Nice contributions so far !
please update at passlab any specials you have?
Any interest in getting 2OZ copper pads? it is not possible to get just the smd pads thick
From my diy board that area of PCB going to see a lot of rough use with changing jfets ,forceps knicks etc.2oz will last longer.
Of course that will make the price go up by 1$ or so. Can do it if there is enough interest. I am fine with 1 oz pad. But for power users if any.just throwing out there.

 

[palmito]

tubesguy (US): 1 x assembled.
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)

 

[KevinHeem]

tubesguy (US): 1 x assembled.
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)
kevinheem (US): 1 x assembled

 

[chede]

tubesguy (US): 1 x assembled.
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)
kevinheem (US): 1 x assembled
chede (Europe) 1 kit

 

[kinku]

IMPORTANT

Guys please pay attention

Count of PCB limited to 20 for now and it seems we have 20(weight increase may change shipping costs).
Above 20 requests will need to pay for that cost (Shared with all request above 20 if there are enough volume)if they want it through this buy.Else feel free to arrange a group buy. I will give my gerbers to you.

Can't offer assembled PCBs.Will honor the initial promised 2!

Kits and PCBs together 20 requests ONLY, WHICHEVER is earliest.Kits price calculated around 6$,plus paypal and shipping.

Please calculate the shipping from US ZIP 20902 USPS only using your choice(expedited vs regular) and include that in paypal message when you send money.

PCB price 2$ if we go with 1oz traces. paypal plus shipping.

Also who are all up for 2oz copper PCB (may last longer if you are matching a lot).I will do only if majority agrees as the price will go up by 1$shipping may too as weight goes up.have to look.

I can get you jumpers in the kit if you pay 1$ extra, else use copper wire.
Insulated Shorting Link - D3087-99 |
Harwin.

 

[e_fortier]

This thread should be moved to the Group Buys section

 

[kinku]

Only if there is anyone coming up!!. Else it is closed already!!

 

[ymwong]

I will have the jumpers. I am OK with 2oz PCB if others want to go for it.

 

[pchw]

I am fine with 2oz copper, too.

 

[Nikon1975]

Guys, I'll gladly take a kit or pcb. I can be a proxy in Europa and assure custom free shipping, if you want.

D.

 

[mravinsky]

I am fine with 2oz copper, too.

So I am.

 

[kinku]

With Nikon, it clearly exceeded 20pcb if everyone who signed up still wants it. I am thinking should it be a group buy.
Nikon talk to Merlin about coordinating in Europe. Not sure about your customs issues.
Only 3-4 out of 20 wants 2 Oz copper , then may be not. Also only one wants a dedicated jumper in kit.

 

[gwrskien]

I think 2oz sounds like a good idea.

Is there some updated prices awailable?

 

[mravinsky]

...and dedicated jumper, also.

 

[kinku]

Started a poll for 2 Oz copper , and dedicated jumper in kit options.
Rather than filling up pages. Open for 2 days.
Time for voting !!!!

 

[ticknpop]

2oz and jumpers - yes

 

[kinku]

Ticknpop please cast your vote, if it does not exceed 60% we can't do that!

 

[Algar_emi]

I'll take a pcb, Don't need the 2oz option, neither the clip
thanks
SB