• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Hypex Ncore 2x250W Stereo amplifier

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
R

raelman

Member
Joined 2014
Hello
For sale a 2 x 250 watts Hypex NCORE NC252MP in black anodised aluminum case.

This unit is BRAND NEW, fully tested, and will be covered with 1 year warranty from Hypex.

Case fits inside one Hypex Ncore NC252MP amplifier stereo module 2 x 250W with built in power supply in a compact power brick.

Specs here: http://www.hypex.nl/product/nc252mp-oem/76

Main SMPS Power supply is an auto switching P.S. (115 / 230VAC) and rated to 650W max. Will work form 115 to 230 VAC.

Hypex only sells Ncore MP series to OEM resellers, that’s the why they are different to the rounded "public" Nc400 series.

The amplifier is an Ncore class D amplifier intended for ultrahigh-fidelity replay systems with flat frequency response irrespective of load (from 2 Ohm to 8 Ohm) and High efficiency (92%) with low output impedance and very low noise.

Ncore is the first Class-D amplifier not just to nudge the best linear amplifiers, but to surpass them in every aspect relevant to sound quality. If you want the ultimate in clarity, resolution and musicality, there is no longer a reason to trade efficiency or compactness.

Sound becomes smooth, effortless, powerful, deep, resolving. Broad and deep soundstage with that amazing feeling of "closiness" of musical experience. Bass is amazingly
controlled and deep.

No resistive losses, no EM/RF radiation, perfect current flows between PSU and amp. What is more, it is Dead silent - no hiss at all. Complete immunity against any interferences from on-board SMPS.

Some features:
Peak Output Power (1KHz, THD=1%): 180W @ 2Ω, 250W @ 4Ω, 200W @ 8Ω
Distortion (THD+N): Typical: 0.0020% Max: 0.006%
DC Offset protection.
Power Bandwidth 20-35kHz
Frequency Response (+0/-3dB. All loads.) 10-50kHz
Voltage gain 26 dB
Input XLR connectors SWITCHCRAFT INC (USA)
Output binding post ELECAUDIO (made in France)
Silver output wires and solders
External dimensions 230x280x80mm (WxDxH)
Full black anodised aluminum front, rear and side pannels. Black iron top and bottom.
Weight 2,8 kg

Asking 750€ + shipping
Pictures are from the units on sale







paginas imagenes
 
Last edited:
R

raelman

Member
Joined 2014
Hypex provides warranty to all their products.
there are 2 ways:
1.- I place the RMA order for you, send you the rma ticket and you send to hypex the amplifier

2.- you can contact hypex and they will help you. The serial number is in their database and they will be able to help you. They are very kind, in fact they repaired for me items from another seller
 
U

UltraFidelity

Member
Joined 2018
meb46 said:
Great project... one question, how did you wire up the LED and power supply enable circuit. I have a NC502MP and haven’t quite figured out the wording to actually wire in a switch and LED yet. Any help would be appreciated!

Thanks
Click to expand...

You will need to use a voltage divider and latching switch. 2 10k resistors will do the trick for the pos power...the switch then is connected to the amp enable and the 5v rail to put it in and take it out of standby...I can show you how with pics and point out the pins if you like.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom