FS: Zilchlab Econowave Crossover PCBs

wiredbecker · 30th May 2017, 10:58 PM

Before Zilch passed away he asked me to keep these crossover boards available and in consistent production for speaker builders everywhere. Pairs are available direct from me for $32 shipped CONUS w/instructions. Send me a PM if you'd like to build a pair of Zilch's Econowave speakers.

For more specific build information check out the massive original thread here on Audiokarma: Zilch's AK Design Collaborative - Econowave Speaker | Audiokarma Home Audio Stereo Discussion Forums

Not to mention Flex Your PCD Mettle on the Parts Express site where he really picked up steam: Flex Your PCD Mettle: - Techtalk Speaker Building, Audio, Video Discussion Forum

djn · 31st May 2017, 03:59 PM

Hey Wired. I am just waiting for some parts to finish up my eWaves using the boards I got from you. They are very nice and makes this build much easier. Dennis.

wiredbecker · 31st May 2017, 07:08 PM

Thanks for the shoutout Dennis! Really looking forward to seeing your next build completed.

wiredbecker · 6th September 2017, 06:21 PM

Thank you for your Econowave PCB orders everyone! Boards are shipping!

Bigscreenbob · 15th December 2017, 06:43 PM

New member and First-time poster here, a speaker mod newbie...

Wiredbecker, I've just sent you a PM -- I'm hoping to get boards (and everything else!) for converting a pair of original large Advents to whatever waveguide and driver is recommended (and affordable) -- I understand the Selenium model 220 8 ohm compression driver with a Pyle PH612 waveguide are recommended for the OLAs.

I appreciate any info. Thanks!

- Bob

wiredbecker · 24th December 2017, 09:29 PM

Thanks Bob, great talking to you! All PM's have been responded to. Happy Holidays everyone!!!

Bigscreenbob · 26th December 2017, 03:51 PM

I appreciate the boards -- and all your help -- very much.

dajack761 · 1st January 2018, 11:14 PM

Quote:

Originally Posted by wiredbecker

FS: Zilchlab Econowave Crossover PCBs

Before Zilch passed away he asked me to keep these crossover boards available and in consistent production for speaker builders everywhere. Pairs are available direct from me for $32 shipped CONUS w/instructions. Send me a PM if you'd like to build a pair of Zilch's Econowave speakers.

For more specific build information check out the massive original thread here on Audiokarma: Zilch's AK Design Collaborative - Econowave Speaker | Audiokarma Home Audio Stereo Discussion Forums

Not to mention Flex Your PCD Mettle on the Parts Express site where he really picked up steam: Flex Your PCD Mettle: - Techtalk Speaker Building, Audio, Video Discussion Forum

Sent you a pm

wiredbecker · 3rd January 2018, 09:53 PM

All PM's have been responded to. Thank you!

wiredbecker · 12th April 2018, 09:41 PM

Thank you for your Econowave PCB orders everyone. All boards have shipped!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: ZilchLab EconoWave crossover boards	pinkfloyd4ever	Swap Meet	4	4th May 2016 07:28 PM
FS: PCBs for passive 2-way crossover	NovaPA	Swap Meet	11	20th April 2016 10:41 PM
FS: Active Crossover PCBs and Power Supplies	aterren	Swap Meet	7	11th December 2013 04:22 AM
pair Zilchlab Econowave PCB crossover boards	bigaudioscotto	Swap Meet	1	28th March 2012 02:52 AM
WTB: Zilchlab Econowave PCB	Wilberforce	Swap Meet	5	29th February 2012 03:04 AM

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st May 2017, 03:59 PM	#2
djn diyAudio Member Join Date: Oct 2004 Location: Albuquerque, New Mexico	Hey Wired. I am just waiting for some parts to finish up my eWaves using the boards I got from you. They are very nice and makes this build much easier. Dennis.

31st May 2017, 07:08 PM	#3
wiredbecker diyAudio Member Join Date: Jun 2007 Location: Albany Landfill, CA	Thanks for the shoutout Dennis! Really looking forward to seeing your next build completed.

6th September 2017, 06:21 PM	#4
wiredbecker diyAudio Member Join Date: Jun 2007 Location: Albany Landfill, CA	Thank you for your Econowave PCB orders everyone! Boards are shipping!

15th December 2017, 06:43 PM	#5
Bigscreenbob diyAudio Member Join Date: Dec 2017 Location: Central Ohio	New member and First-time poster here, a speaker mod newbie... Wiredbecker, I've just sent you a PM -- I'm hoping to get boards (and everything else!) for converting a pair of original large Advents to whatever waveguide and driver is recommended (and affordable) -- I understand the Selenium model 220 8 ohm compression driver with a Pyle PH612 waveguide are recommended for the OLAs. I appreciate any info. Thanks! - Bob

24th December 2017, 09:29 PM	#6
wiredbecker diyAudio Member Join Date: Jun 2007 Location: Albany Landfill, CA	Thanks Bob, great talking to you! All PM's have been responded to. Happy Holidays everyone!!!

26th December 2017, 03:51 PM	#7
Bigscreenbob diyAudio Member Join Date: Dec 2017 Location: Central Ohio	I appreciate the boards -- and all your help -- very much.

3rd January 2018, 09:53 PM	#9
wiredbecker diyAudio Member Join Date: Jun 2007 Location: Albany Landfill, CA	All PM's have been responded to. Thank you!

12th April 2018, 09:41 PM	#10
wiredbecker diyAudio Member Join Date: Jun 2007 Location: Albany Landfill, CA	Thank you for your Econowave PCB orders everyone. All boards have shipped!