FS: Pair of PAS (Professional Audio Systems) LX-2800 18" High-Excursion subwoofers
For sale: Pair of PAS /Professional Audio Systems LX-2800 18" subwoofers. In great condition- new recones. One half inch X-max (one inch peak-to-peak LINEAR cone travel), 1.5" total peak-to-peak excursion before damage.
Here's the datasheet for these:
http://www.pas-toc.com/pdf/drivers/LX-2800-DATA.pdf
In great condition, work perfectly.
Selling for $300 for the pair, plus shipping. No international shipping (USA address only).
Thanks!
Regards,
Gordon.
For sale: Pair of PAS /Professional Audio Systems LX-2800 18" subwoofers. In great condition- new recones. One half inch X-max (one inch peak-to-peak LINEAR cone travel), 1.5" total peak-to-peak excursion before damage.
Here's the datasheet for these:
http://www.pas-toc.com/pdf/drivers/LX-2800-DATA.pdf
In great condition, work perfectly.
Selling for $300 for the pair, plus shipping. No international shipping (USA address only).
Thanks!
Regards,
Gordon.
Pictures of the units for sale:
Drivers will ship double-boxed (woofers in individual 18" woofer boxes with conformal foam inserts, then those packed/padded inside a master box).
Note: The tape on the gaskets, was left over from when the drivers were reconed recently (that was to hold the edges of the gaskets down while the glue was curing). They haven't been bolted into a baffle since they've been reconed- they are functionally like-new with zero hours use, in terms of the moving assembly.
Regards,
Gordon.
Drivers will ship double-boxed (woofers in individual 18" woofer boxes with conformal foam inserts, then those packed/padded inside a master box).
Note: The tape on the gaskets, was left over from when the drivers were reconed recently (that was to hold the edges of the gaskets down while the glue was curing). They haven't been bolted into a baffle since they've been reconed- they are functionally like-new with zero hours use, in terms of the moving assembly.
Regards,
Gordon.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.