For sale is a pair of gently used Plitron PAT-3050-SE single ended toroidal output transformers. I picked these up recently and have since decided on a different set of iron for the amps in mind.
These are real beauties, potted in round cans. Great for your high end SE 300B or overkill 45 project.
Specs are the same as the current production PAT-3050-SE-02 model (see below), but without the 16ohm tap. The transformers for sale do not have a 16ohm tap.
From the Plitron site:
Asking $550 for these. Current list price for these transformers is $1,000/pr. + s/h from Canada.
Photos...
Thanks.
Nate
These are real beauties, potted in round cans. Great for your high end SE 300B or overkill 45 project.
Specs are the same as the current production PAT-3050-SE-02 model (see below), but without the 16ohm tap. The transformers for sale do not have a 16ohm tap.
From the Plitron site:
Product ID: PAT-3050-SE-02
13W Single Ended Output Transformer
PAT-SE range of single ended toroidal output transformers is especially suited for the 300B tube or its equivalents.
The primary impedance of this transformer is 5 kOhms and secondary impedances of 4, 8 and 16 Ohms. It has 13 Watts of power with frequency bandwidth from 20 Hz to 100 kHz. The differential phase distortion is less than three degrees up to 50 kHz.
Weight: 5.40 Kgs
Height: 177.8 mm
Width: 177.8 mm
Length: 177.8 mm
13W Single Ended Output Transformer
PAT-SE range of single ended toroidal output transformers is especially suited for the 300B tube or its equivalents.
The primary impedance of this transformer is 5 kOhms and secondary impedances of 4, 8 and 16 Ohms. It has 13 Watts of power with frequency bandwidth from 20 Hz to 100 kHz. The differential phase distortion is less than three degrees up to 50 kHz.
Weight: 5.40 Kgs
Height: 177.8 mm
Width: 177.8 mm
Length: 177.8 mm
Asking $550 for these. Current list price for these transformers is $1,000/pr. + s/h from Canada.
Photos...
Thanks.
Nate
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.