• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Crossover Parts, New/Used, Misc Lot

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
R

RobOnoCo

Member
Joined 2010
I have amassed a fair quantity of crossover parts that may be of use to a fellow DIY'er. Items are eigher listed as new or clipped, meaning they have been clipped out of circuit. In most cases, the clipped units should be usable, average of 1/2" lead left on them. Some of the clipped inductors may have leads as short as 1/4", but still look usable. Selling the lot for $40, including shipping via Flat Rate USPS Priority. PM if interested.

Capacitors

2) Erse 16uF/250V Metalized Polyprophelene New
2) Erse 24uF/400V Metalized Polyprophelene New
2) Erse 6.2uF/250V Metalized Polyprophelene New
2) Erse 3.9uF/250V Metalized Polyprophelene New
2) Erse 8.2uF/400V Metalized Polyprophelene New
4) Bennic 16uF/250V Metalized Polyprophelene New
2) Bennic 12uF/250V Metalized Polyprophelene New
2) Bennic 2.7uF/250V Metalized Polyprophelene New
2) Bennic 1.5uF/250V Metalized Polyprophelene New
2) Bennic 1.0uF/160V Metalized Polyprophelene New
2) Bennic 100uF/100V Non-Polar Electrolytic New
4) Bennic 40uF/100V Non-Polar Electrolytic New
2) Dayton 6.2uF/250V Metalized Polyprophelene New
2) Dayton 2.2uF/250 Metalized Polyprophelene New
4) GE 5uF/400V Mylar New
2) Jantzen 3.3uF/400V Metalized Polyprophelene Clipped
2) Jantzen 2.7uF/400V Metalized Polyprophelene Clipped
6) Jantzen 2.2uF/400V Metalized Polyprophelene Clipped
6) Jantzen 1.0uF/400V Metalized Polyprophelene Clipped
4) Dayton 10uF/250V Metalized Polyprophelene Clipped
2) Dayton 5.1uF/250V Metalized Polyprophelene Clipped
2) Dayton 3.3uF/250V Metalized Polyprophelene Clipped
2) Dayton 0.68uF/250V Metalized Polyprophelene Clipped

Inductors

4) Madisound 0.85 Air Wound New
3) Madisound 3 Air Wound New
4) Madisound 0.3 Air Wound New
2) Madisound 0.15 Air Wound New
2) Madisound 12 mH Ferrite Core New
2) Falcon 0.33 mH Ferrite Core Clipped
2) Falcon 1.0 mH Ferrite Core Clipped
2) Falcon 3.6 mH Ferrite Core Clipped
2) Madisound 1.6 mH Ferrite Bobbin Clipped
2) Madisound 0.38 mH Ferrite Bobbin Clipped
2) Madisound 0.64 mH Ferrite Bobbin Clipped
2) Madisound 1.0 mH Ferrite Bobbin Clipped
2) Madisound 0.6 mH Ferrite Bobbin Clipped

Resistors

2) Mundorf 3.9 ohm 10W Wirewound New
4) Mundorf 10 ohm 10 W Wirewound New
8) Dale 7.5 ohm 10W Wirewound New
4) Eagle 10 ohm 5W Metal Film ? New
2) Dayton 20 ohm 10W Sand Cast Clipped
2) Dayton 16 ohm 10W Sand Cast Clipped
2) Dayton 3 ohm 10W Sand Cast Clipped
2) Dayton 25 ohm 10W Sand Cast Clipped
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom