These are all enclosures from Par-Metal. They were all once amplifier or preamp cases and include everything that is pictured, they are the 20 series cases. Most of these cost 70-90 new. I am selling them for the prices indicated below, plus shipping, they may be missing some of the screws to hold the covers on, but they would be about $2.00 at home depot. I'd guess shipping will be in the $10-20 range. You will notice below that they are numbered, please include the numbers in the payments/correspondence.
For fastest response, paypal or e-mail to pkhilgeman@gmail.com.
NUMBER 1 - $40.00 - 16" wide, 12" deep, 4" tall, custom front panel with 22mm hole, bamboo feet, standard amplifier stuff on the rear, includes IEC inlet, binding posts, looks like 1 switch.
NUMBER 2 - $30.00 - 16" Wide, 12" deep, 4" tall, At one point, this was a 6 ch. volume control with 4 amplified channels on-board. Some of the circuitry is still inside, some is not. It includes 4 sets of binding posts and some of the balanced inputs. The front panel has two roughly 5/8" holes.
NUMBER 3 - $50.00 - 16" Wide, 16" Deep, 5" Tall large amplifier case Includes all connectors for 2 channels, and looks like it has holes for 4 channels. Includes IEC inlet. Front panel is clean.
NUMBER 4 - $40.00 - 16" Wide, 16" Deep, 4" Tall Large amplifier case, includes connectors for 2 ch. and IEC inlet. One hole on front panel, maybe 5/8". Pictures might be confusing, it is simply on-top of the above amplifier.
Last, I still have these tweeters for sale, $20.00 Each, 3 available, one is missing a lead, but there is plenty left on the lead-out wire to re-solder, that one is $10.00:
You can find more info at madisound:
https://www.madisound.com/store/product_info.php?products_id=8489
Thanks for looking!
For fastest response, paypal or e-mail to pkhilgeman@gmail.com.
NUMBER 1 - $40.00 - 16" wide, 12" deep, 4" tall, custom front panel with 22mm hole, bamboo feet, standard amplifier stuff on the rear, includes IEC inlet, binding posts, looks like 1 switch.
NUMBER 2 - $30.00 - 16" Wide, 12" deep, 4" tall, At one point, this was a 6 ch. volume control with 4 amplified channels on-board. Some of the circuitry is still inside, some is not. It includes 4 sets of binding posts and some of the balanced inputs. The front panel has two roughly 5/8" holes.
NUMBER 3 - $50.00 - 16" Wide, 16" Deep, 5" Tall large amplifier case Includes all connectors for 2 channels, and looks like it has holes for 4 channels. Includes IEC inlet. Front panel is clean.
NUMBER 4 - $40.00 - 16" Wide, 16" Deep, 4" Tall Large amplifier case, includes connectors for 2 ch. and IEC inlet. One hole on front panel, maybe 5/8". Pictures might be confusing, it is simply on-top of the above amplifier.
Last, I still have these tweeters for sale, $20.00 Each, 3 available, one is missing a lead, but there is plenty left on the lead-out wire to re-solder, that one is $10.00:
You can find more info at madisound:
https://www.madisound.com/store/product_info.php?products_id=8489
Thanks for looking!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.