• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: 2A3, Dynaudio, ADS, SEAS, Sprague

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
K

kjunom

Member
Joined 2004
2A3 starter parts kit:
2@ Electro-Harmonix 2A3, used for about 1 year
2@ JJ Tesla ECC99 dual triodes, used for about 1 year
2@ ceramic sockets for 2A3
2@ ceramic sockets for ECC99
6@ 13k, 1%, 1W resistors
2@ Beckman 25 ohm, 25 turn pots
1 @ Hammond 166S2 txr (2.5VCT, 10A) never used
I can include schematics of many circuits I tried
$45

6@ 35,000uf/25VDC Sprague Powerlytic model 36D, $4 each

2@ Focal 8N401DBE 8" dual voice coil speakers
Neoflex cone
Neoprene suspension
fs 30.9 hz, Qts 0.33, Vas 84.1 liters, pwr 65W, eff 91 db
will include Focal datasheets
$10 for the pair

~20@ Beckman Instruments Model 7246 potentiometer
great for setting the hum balance on 2.5V heaters
25 ohm, 25 turn
2/$5, free if they don't measure well

ADS 315i component car speakers
5" paper cone woofer with cast frame
1" tweeter
crossover
small dent on wire grille of one of the woofers
$7.50 with original box

Dynaudio Twynn speaker pair
MTM configuration
4@ 17W75ext
2@ D260
LEAP designed crossover
Madisound oak veneer tower cabinets, water discoloration on bottom 1" of one cabinet
$375 for the pair, have the original shipping boxes for the drivers and the cabinets
local pickup or I'll have to see if UPS will ship them, or will part out the drivers with the crossovers for $350

Shipping will be USPS and shipping cost will be the estimated shipping cost, estimated with a Pelouz shipping scale and the USPS shipping rates. I pack very well and the estimate is usually within one dollar. Sometime high, sometimes low.
 
P

pchw

Member
Joined 2006
kjunom said:
2A3 starter parts kit:
2@ Electro-Harmonix 2A3, used for about 1 year
2@ JJ Tesla ECC99 dual triodes, used for about 1 year
2@ ceramic sockets for 2A3
2@ ceramic sockets for ECC99
6@ 13k, 1%, 1W resistors
2@ Beckman 25 ohm, 25 turn pots
1 @ Hammond 166S2 txr (2.5VCT, 10A) never used
I can include schematics of many circuits I tried
$45

6@ 35,000uf/25VDC Sprague Powerlytic model 36D, $4 each

2@ Focal 8N401DBE 8" dual voice coil speakers
Neoflex cone
Neoprene suspension
fs 30.9 hz, Qts 0.33, Vas 84.1 liters, pwr 65W, eff 91 db
will include Focal datasheets
$10 for the pair
Click to expand...
Hi,

I am interested in the above.

Thanks,
 
K

kjunom

Member
Joined 2004
shipped

The 2A3 kit, capacitors and the SEAS speakers shipped safely and are no longer available.

A correction on the pots. They are about 10 turn. I was assuming the marking on the pots meant 25 turns, but only about 8-10 turns does it.

Also, if anyone is interested, I have a pair of Crown M-600 amps (yeah, 92 lbs @ w/dual input power transformers) for local pickup.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom