Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|30th June 2006, 01:04 PM||#1|
Join Date: May 2006
Does this look any good?
I was about to by a 15" adire driver when this one caught my eye. It's a 15" diameter unit that sells here for $99, versus the others $270 odd Australian dollars. It looks not to bad! Have modelled it and in a reflex enclosure of 160 liters tuned to 20hz it looks to be only 6db down at 20hz and is substantially flat down to 30hz.The group delay is less than 20msec above 20 hz. I realize the QTS is a bit high for a reflex driver, but do you think it would work OK based on these specs? I'm a beginner at this design stuff.
Nominal impedance: 4 Ohms
Power rating: 250WRMS
Sensitivity at 1W@1m: 88.48dB
Voice coil resistance (Re): 3.5
Resonant frequency (Fs): 25.65
Mechanical Q factor (Qms): 3.552
Electrical Q factor (Qms): 0.578
Total Q factor (Qts): 0.497
Equivalent volume (Vas): 150.7Lt
Voice coil diameter: 65.5mm
X max: 15mm
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|What makes the good guitar pickup sound so good?||darkfenriz||Instruments and Amps||31||27th June 2018 12:32 AM|
|Good switch for Stepped attentuater, Good cheap RCA jacks||pjpoes||Parts||20||10th March 2005 08:47 PM|
|Pioneer TS-W304C- anyone have good design for it? and is it good for home sub?||XteveX||Multi-Way||7||28th April 2004 04:05 AM|
|New To Site?||Need Help?|