Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

DIY Budget subwoofer design
DIY Budget subwoofer design
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd October 2018, 12:02 PM   #11
bjorno is offline bjorno  Sweden
diyAudio Member
 
Join Date: Mar 2005
Location: Jacobsmountain
Send a message via MSN to bjorno
Hi All,

FYI:

b
Attached Images
File Type: jpg Fenton 8inch_SKU 902.426_OK.JPG (382.6 KB, 119 views)
  Reply With Quote
Old 20th October 2018, 02:06 AM   #12
Tweet is offline Tweet  Australia
diyAudio Member
 
Join Date: Jan 2015
The 8" subwoofer from SB Acoustics may be worth a consideration.............

8" SB23MFCL45-8 :: SB Acoustics

The 4 ohm version has a slightly higer sensitivity...............

8'' SB23MFCL45-4 :: SB Acoustics

These are designed for a smaller box of less than 20 litres.

C.M
  Reply With Quote
Old 20th October 2018, 06:57 PM   #13
hagarth is offline hagarth
diyAudio Member
 
Join Date: Sep 2018
Thanks.
I already built the subwoofer and and just waiting for an opportunity to assemble the electronics, post some pictures and actually test it.

The final enclosure had 290x400x462 mm, and was built from 16mm MDF. This had to do with the space available in the living room, the size of the panels commonly available and the cost. The speaker in the front, with a round port below.

The interior and all exposed faces were "sealed" with several layers of a solvent based product, and the exterior was covered with two layers of a very thick primary, sanded to 600 grit. Instead of painting, I found a black vinyl with a good looking mate texture and used it. It looks nice and was _very fast_ to apply.

A brief test up to 50W provided very nice results with a clear and deep bass (it seems to fit the purpose). However at this level of power, many problems can go undetected.

I plan to add a TDA 7498E Amp, and a NE5532 LPF, which are around in some storage box.
  Reply With Quote

Reply


DIY Budget subwoofer designHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Subwoofer Design Ideas $150 Budget Curt B Subwoofers 18 15th October 2017 02:25 AM
Budget subwoofer build Colza Subwoofers 3 15th February 2014 07:52 PM
Low hz, budget subwoofer ?????? gadgeteer123 Subwoofers 31 27th October 2010 03:06 PM
Budget Subwoofer wasted911 Subwoofers 9 9th June 2008 11:39 AM
Ratshack Budget Subwoofer bickeler Subwoofers 16 3rd April 2008 03:57 PM


New To Site? Need Help?

All times are GMT. The time now is 10:43 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki