Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Definitive prosub 60 issues
Definitive prosub 60 issues
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 28th October 2014, 04:27 AM   #1
saabracer23 is offline saabracer23  United States
diyAudio Member
Join Date: May 2006
Default Definitive prosub 60 issues

So I have a definitive tech sub that keeps blowing fuses. As soon as I put in a new fuse and plug it in I get a one half second burp from the woofer and then nothing. I received it this way for free, good price right. So I took it apart to start checking things. First thing I noticed, if there is no load on the amp (woofer is disconnected) then the amp will stay on all day no problem. Once I hook up the amp outputs the the woofer leads the amp goes to sleep. I measured the woofer impedance and it fluctuates a bit but sits right around 60 ohms!!! I know that some of the def tech subs that were built into the towers had high impedances but not sure if they were this high. Would this cause the amp to blow a fuse? Thoughts?

Couldn't find published TS parameters of the driver so not sure what proper imp should be. It's a prosub 60 by the way. 8" woofer with a 150 watt rms woofer.

  Reply With Quote
Old 28th October 2014, 05:47 AM   #2
GM is offline GM  United States
diyAudio Member
GM's Avatar
Join Date: Jun 2003
Location: Chamblee, Ga.
Support | Definitive Technology


edit: FWIW, when I searched 'Definitive prosub 60 blows fuse' I found numerous postings about bad amps that were either DOA brand new or would blow fuses frequently until the amp died. Some folks tried slow blow fuses, but it didn't solve the problem long term.
Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

Last edited by GM; 28th October 2014 at 06:06 AM.
  Reply With Quote


Definitive prosub 60 issuesHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Peavey Classic 60/60 bias mod advice RIC Instruments and Amps 7 4th November 2013 10:34 PM
Ampeg J-12T 60's amp issues? Help! Goldstache Instruments and Amps 23 14th September 2012 07:00 PM
WTB: 120VCT (60-0-60) transformer for balanced power supply jmillerdoc Swap Meet 2 14th April 2011 06:08 PM
Yamaha M-60 power amp for sale (w/ impaired C-60 preamp) rainzoneman Swap Meet 10 3rd December 2009 01:44 PM
70 Issues of Stereophile the small ones! $60 Zero Cool Swap Meet 4 24th May 2007 10:24 PM

New To Site? Need Help?

All times are GMT. The time now is 06:23 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio