i assume the k1 along side an eq would be ideal but financialy that may not be feasable in the near future
i will most likely do a pair of h-frame dipole with the peerless xls 12"
and am leaning towards just the dayton 500w on each
i havent done all my homework so i dont know if more eq-ing is needed with a dipole... if so i would just utilize a pair of 15" sealed i think (too bad i sold my second ascendant audio avalanch 15")
it will be used with "thor" TL utilizing the perscribed excel mids but an lcy 110 for the tweets, fed by a rotel 1080 (2x 300w+ @ 4 ohms) at this point i will be playing the speakers full range and will be using the subwoofers lowpassed around 60-70 hz if not lower id assume
any opinions on class "g" amps is apreciated to
along with any real life current draw numbers for music on any of the listed amps
crown ce1000
crown K-1
dayton 1000w plate
dayton 500w plate
i will most likely do a pair of h-frame dipole with the peerless xls 12"
and am leaning towards just the dayton 500w on each
i havent done all my homework so i dont know if more eq-ing is needed with a dipole... if so i would just utilize a pair of 15" sealed i think (too bad i sold my second ascendant audio avalanch 15")
it will be used with "thor" TL utilizing the perscribed excel mids but an lcy 110 for the tweets, fed by a rotel 1080 (2x 300w+ @ 4 ohms) at this point i will be playing the speakers full range and will be using the subwoofers lowpassed around 60-70 hz if not lower id assume
any opinions on class "g" amps is apreciated to
along with any real life current draw numbers for music on any of the listed amps
crown ce1000
crown K-1
dayton 1000w plate
dayton 500w plate