I've just been putting this kit together and apart from getting the LEDs round the wrong way initially all went smoothly. However. when I test the unit by connecting PA on the right hand channel to V+ the relay fails to trip. When connecting PA to V- it trips fine. The left hand channel trips for both V+ and V-.
I was hoping someone would point me in the right direction.
I was hoping someone would point me in the right direction.
Attachments
Frank Berry said:D4 may be installed backwards.
Or D2 (in some cases).
cyteen said:Thanks for the quick reply, looking at D4 it seems to be consistant with the markings on the top of the pcb...
Repeat test procedure on right channel and measure DC voltage on both side of D4 for +V on input.
Regards,
Milan
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- velleman k4700 speaker protection circuit