I will go for it!
One of the things I like about them is that they have 2 mounting holes - that must be good for thermal conductivity.
60MHz compared to 2N3055's 2.5MHz, yeah I can see that might be a problem. I reckon the Tannoys will be pretty inductive, and I'll be making monoblocks so cable capacitance won't amount to much. Any implications there?
One of the things I like about them is that they have 2 mounting holes - that must be good for thermal conductivity.
60MHz compared to 2N3055's 2.5MHz, yeah I can see that might be a problem. I reckon the Tannoys will be pretty inductive, and I'll be making monoblocks so cable capacitance won't amount to much. Any implications there?
Hi bremen,
They won't acheive 60MHz in a JLH circuit with such a high impedance drive.
Implications - as with the JLH's - very clean sound up to about half of maximum power, but getting soft beyond that with multi-driver loudspeakers.
With Tannoys the sound will be something to look forward to.
Cheers .............. Graham.
They won't acheive 60MHz in a JLH circuit with such a high impedance drive.
Implications - as with the JLH's - very clean sound up to about half of maximum power, but getting soft beyond that with multi-driver loudspeakers.
With Tannoys the sound will be something to look forward to.
Cheers .............. Graham.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.