Go Back   Home > Forums > >

Solid State Talk all about solid state amplification.

sony TA 1055
sony TA 1055
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools
Old 29th August 2004, 04:59 PM   #1
LAO is offline LAO  Italy
diyAudio Member
Join Date: Aug 2004
Location: Pistoia
Default sony TA 1055

would be interested to the outline electrical worker din an old Sony TA1055, who possesses could send it to me it for and mail, thanks
  Reply With Quote
Old 30th August 2004, 04:54 AM   #2
dshoaf is offline dshoaf
diyAudio Member
Join Date: Apr 2001
Location: Santa Cruz, CA
Default Not sure what you are asking for....

but I do remember these amps back in the 70s. If I read you right, you are looking for the pinout of the DIN connector? If so, there's a fast way to figure out what kind of cable you will have to make. You may be able to buy one but they will be hard to find here in the US as most electronic supply houses have dumped that sort of thing. They will be available online, however.

To determine what pins are the signal and ground, remove the cover and the side panels - Sony supplied walnut panels on some versions of this amp. Find the DIN connector on the back and look for 2 wires soldered to it. There will be 2 connections for each wire. The red and white wires will be the hot side for each channel. The other two connections will be the grounds for each channel and will also be the shield on each of the 2 wires.

Hope that helps you some.


  Reply to this post


sony TA 1055Hide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Debugging a Sony TA-1055 oddbjorn Solid State 19 24th October 2010 11:24 AM
WTB: JFETs: КП801, КП802 aka KP801, KP802 Faust3D Swap Meet 4 13th January 2010 12:57 PM
Question about Sony TA-1055 jonjonjonjon Solid State 3 28th September 2007 01:20 AM
GC vs Sony TA 1055 - Apologies Jim Read Chip Amps 10 13th April 2003 09:52 AM

New To Site? Need Help?

All times are GMT. The time now is 12:44 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio