Just wondering if anyone tried this active XO?
http://users.otenet.gr/~athsam/3way...r_phase_eng.htm
Anny comments? How would it compare to the MXO?
http://users.otenet.gr/~athsam/3way...r_phase_eng.htm
Anny comments? How would it compare to the MXO?
I think these filters in general aren't popular because there's few options to tune the filter. Apart from picking a single crossover frequency (two frequencies for a 3-way) there isn't much you can change about it. Your stuck with a textbook filter response, which isn't very usefull when building speakers. If you need any corrections, you'll need additional electronics.
With a filter like the MOX you get to set the order, the Q and the Fc for the high- and lowpass independently. There's a good change that any corrections you need can be made using these parameters, but if you need more there's still some space left on the PCB.
With a filter like the MOX you get to set the order, the Q and the Fc for the high- and lowpass independently. There's a good change that any corrections you need can be made using these parameters, but if you need more there's still some space left on the PCB.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.