Looking for Amp Designers

maLx · 25th August 2020, 09:47 PM

Hi,

I'm looking for someone who can create professional level amplifiers and experienced with both tubes and solid state active amplification. I need to have some custom amplifiers built.

If any of you are out there, please DM me a resume and pics of your work, as well as contact info.

Thanks!

rayma · 25th August 2020, 09:57 PM

If you do this, make sure that you receive complete documentation, schematics, BOM, pcb Gerber files, etc.
You would likely end up servicing custom-built electronics yourself.

maLx · 25th August 2020, 10:11 PM

Thanks for the tip, yeah I've gotten a few of these done before so it's not my first rodeo, the guy I usually work with is just so backed up.

Hope you're staying safe, crazy times!

rayma · 10:56 PM

Safer than I'd like.

Even really good people will be much better at solid state design than tubes, or vice-versa.
Maybe you should look for a specialist in one or the other. Also, things would get done twice as fast.

Are you sure there are no commercially available amplifiers that will do the job(s)?

kokoriantz · 26th August 2020, 02:08 AM

Contact George, tubelab https://www.diyaudio.com/forums/tubelab/

maLx · 26th August 2020, 02:31 AM

Thanks for recommending George. I took a look at the site and couldn't find his contact info but I'll dig a little deeper tomorrow.

JMFahey · 26th August 2020, 04:44 AM

Hope you have DEEP pockets.

Not sure you have an idea how much that can cost.

MOER · 26th August 2020, 04:48 AM

Zed Audio performs this function for our clients.

I have been designing tube and solid state since the early 70's.

Feel free to contact me for further information.

Steve Mantz

kokoriantz · 26th August 2020, 04:49 AM

Quote:

Originally Posted by maLx

Thanks for recommending George. I took a look at the site and couldn't find his contact info but I'll dig a little deeper tomorrow.

His PM https://www.diyaudio.com/forums/priv...=newpm&u=34285

Deepak Bains · 31st August 2020, 05:37 AM

[QUOTE=maLx;6320126]Hi,

I'm Deepak Bains from india,now i am 69+ and have experience of more than 50 years in designing audio amplifiers and many types of electronic equipment and instruments.since 1992 to 2016 i was working as chief designer in a amplifier production unit.most of my circuits are my original work.i design my pcb on coreldraw.
Thanks

25th August 2020, 09:47 PM	#1
maLx diyAudio Member Join Date: Feb 2018	Looking for Amp Designers Hi, I'm looking for someone who can create professional level amplifiers and experienced with both tubes and solid state active amplification. I need to have some custom amplifiers built. If any of you are out there, please DM me a resume and pics of your work, as well as contact info. Thanks!

25th August 2020, 10:54 PM	#4
rayma diyAudio Member Join Date: Apr 2011	Safer than I'd like. Even really good people will be much better at solid state design than tubes, or vice-versa. Maybe you should look for a specialist in one or the other. Also, things would get done twice as fast. Are you sure there are no commercially available amplifiers that will do the job(s)? Last edited by rayma; 25th August 2020 at 10:56 PM.

26th August 2020, 04:44 AM	#7
JMFahey diyAudio Member Join Date: Mar 2009 Location: Buenos Aires - Argentina	Hope you have DEEP pockets. Not sure you have an idea how much that can cost. __________________ Design/make/service musical stuff in Buenos Aires, Argentina, since 1969.

26th August 2020, 04:48 AM	#8
MOER diyAudio Member Join Date: Aug 2003 Location: NEWBURY PARK CA	Amplifier Design Zed Audio performs this function for our clients. I have been designing tube and solid state since the early 70's. Feel free to contact me for further information. Steve Mantz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for Amp Designers	maLx	Tubes / Valves	13	27th August 2020 01:09 AM
What tools are available and useful for TT designers?	jackinnj	Analogue Source	3	26th January 2013 02:27 PM
Model designers	dbaudio	Swap Meet	0	15th October 2008 02:09 PM
What Silicon Fab designers do all day	pinkmouse	Everything Else	0	27th August 2003 04:07 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th August 2020, 09:57 PM	#2
rayma diyAudio Member Join Date: Apr 2011	If you do this, make sure that you receive complete documentation, schematics, BOM, pcb Gerber files, etc. You would likely end up servicing custom-built electronics yourself.

25th August 2020, 10:11 PM	#3
maLx diyAudio Member Join Date: Feb 2018	Thanks for the tip, yeah I've gotten a few of these done before so it's not my first rodeo, the guy I usually work with is just so backed up. Hope you're staying safe, crazy times!

26th August 2020, 02:08 AM	#5
kokoriantz diyAudio Member Join Date: Dec 2015 Location: south east asia	Contact George, tubelab https://www.diyaudio.com/forums/tubelab/

26th August 2020, 02:31 AM	#6
maLx diyAudio Member Join Date: Feb 2018	Thanks for recommending George. I took a look at the site and couldn't find his contact info but I'll dig a little deeper tomorrow.

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read