AEM 6000 ready to build

[suzyj]

I don’t understand your question. Maybe you should create a simulation (or wire up a circuit) of what you’re trying to do and measure what happens.

 

[schillg11]

Hello Suzy,


according to your sketch from #76, here is my idea creating the voltages for the OPS and the frontend. Does it work also, as i draw in the attached sketch?


best regards

Gunni

 

[Trollet]

I guess it Will work as long as both transformers work in phase.
It's easier to rectify first and connect in series there after.
Then You don't need to check phase.

Figge.

 

[suzyj]

Yeah, like Figge says, should work fine. This is effectively what’s done with tapped secondaries in commercial amps.

 

[The golden mean]

So, who stands behind the Connexelectronic´s version?


http://connexelectronic.com/wp-content/uploads/2017/08/AEM6000_Audio_Amplifier_Module.pdf

 

[suzyj]

It’s not their version. They stole my layout and erased Tilbrook’s name from the silkscreen.

 

[Tromperie]

Interesting disclaimer from the users of your IP



They take a view with which Donald Trump takes issue.