Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Suggestions for a balanced input class A amplifier
Suggestions for a balanced input class A amplifier
Suggestions for a balanced input class A amplifier Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 26th January 2014, 09:48 PM   #1
Sandor is offline Sandor  Italy
diyAudio Member
 
Join Date: Mar 2004
Location: Milan
Default Suggestions for a balanced input class A amplifier

I'd like to build a pair of monoblock amplifiers that meet the following requirements:
1) rms power 50 W or more
2) class A
3) balanced input
4) ability to drive speakers that go down to 2 ohms

Any suggestion for a good diy project would be much appreciated.
Thank you.
  Reply With Quote
Old 26th January 2014, 11:09 PM   #2
tvrgeek is offline tvrgeek  United States
diyAudio Member
 
Join Date: Dec 2009
Location: North Carolinia/Piedmont
Head over to the Pass Labs forum where the do insane thing like this with MOSFETS.

The EU energy efficiency police will not like you for this.

Or just go find a used Threshold/Krell/Levinson. Probably a lot cheaper than DIY, but not as much fun.
  Reply With Quote
Old 27th January 2014, 12:35 AM   #3
sreten is offline sreten  United Kingdom
R.I.P.
 
Join Date: Nov 2003
Location: Brighton UK
Hi,

A pure class amplifier that does any sort of power into 8
ohms is an exercise in futility making it 2 ohms capable.

rgds, sreten.
  Reply With Quote
Old 27th January 2014, 01:50 AM   #4
jacco vermeulen is offline jacco vermeulen  Netherlands
diyAudio Member
 
jacco vermeulen's Avatar
 
Join Date: Oct 2004
Quote:
Originally Posted by Sandor View Post
1) rms power 50 W or more
2) class A
3) balanced input
4) ability to drive speakers that go down to 2 ohms
Easiest and cheapest to build would be the Pass/Thagard A75.
(2-part building article for download at FirstWatt)
  Reply With Quote
Old 27th January 2014, 09:38 PM   #5
Sandor is offline Sandor  Italy
diyAudio Member
 
Join Date: Mar 2004
Location: Milan
Thank you all for advices.

The A75 is quite interesting but I think it is expensive and challenging.
Do you think a Pass A40 could drive well a pair of Magneplanar MMG? It could be an easier to build and more affordable alternative to A75. Sadly, its input is not balanced...

@sreten
I'm not a native english speaking person, I'm afraid I've not understood the sense of your contribute. May I ask to clarify a bit? Thanks a lot.

Last edited by Sandor; 27th January 2014 at 09:45 PM.
  Reply With Quote
Old 28th January 2014, 12:05 AM   #6
jacco vermeulen is offline jacco vermeulen  Netherlands
diyAudio Member
 
jacco vermeulen's Avatar
 
Join Date: Oct 2004
With loudspeakers that go well under 4 ohm, it's safer and easier to pick a power amplifier with a MOSFET output stage.

2-ohm capable amplifiers with bipolar output transistors would need a relatively big output stage, or protection add-ons, which makes it more complex.

A 50W class A power amp will require a big case, large heatsinks, and big power supplies anyway.
Full 50W class A in 8 ohm means a minimum idle dissipation of 110W per channel.
220W dissipation for 2 channels is a heat figure that is hard to get rid of with a stereo amp case. Without fans, it would have to be huge.

(the A75 is easy to downsize, btw, and suitable output devices are really affordable)

Easiest for you to do would be to order boards from the diyA store, the BA stuff.
Making PCB's and amp cases are the difficult parts of building an amplifier for most.
  Reply With Quote
Old 28th January 2014, 12:18 AM   #7
BobEllis is offline BobEllis  United States
diyAudio Member
 
BobEllis's Avatar
 
Join Date: Sep 2003
Location: Upstate NY
Sandor,

I built a pair of A75s as a first project, and they worked first try. I had some electronics background, but it is possible. The article is long because it's full of learning. It's a good choice for your 2Ω requirement.
  Reply With Quote
Old 28th January 2014, 12:19 AM   #8
hazard500 is offline hazard500  Australia
diyAudio Member
 
Join Date: Mar 2012
Location: Melbourne
Quote:
Originally Posted by Sandor View Post
I'd like to build a pair of monoblock amplifiers that meet the following requirements:
1) rms power 50 W or more
2) class A
3) balanced input
4) ability to drive speakers that go down to 2 ohms

Any suggestion for a good diy project would be much appreciated.
Thank you.
Well here is my DIY project. I've been using these amps for about 10 years now, and never had a problem (but I admit when its 45 deg in Melbourne like it was 2 weeks ago, I don't turn them on).

40 Watts class A, balanced in. I drive a 4 ohm ribbon tweeter with these. Never gone down to 2 ohm, but it wouldn't hurt (though you'd get less power out).

balanced class A fet amplifier

Last edited by hazard500; 28th January 2014 at 12:23 AM.
  Reply With Quote
Old 28th January 2014, 03:47 AM   #9
Bonsai is offline Bonsai  Europe
diyAudio Member
 
Bonsai's Avatar
 
Join Date: Jul 2003
Location: Europe
Sandor, go with the Pass proposal - order the PCB's from the DIYaudio store. Lots have been built and you can get help/advice. You are also lucky - Modushop are based in Italy and you can get a very BIG 5U case with heatsinks for about 200 Euros. This should get you to 50W class A per channel with heatsink temps at 60C max.

modushop.biz

Hazard500 amp looks good also - fun project!
  Reply With Quote

Reply


Suggestions for a balanced input class A amplifierHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Class D Vs Class I (Balanced Current Amplifier) rmsaudio Class D 30 23rd February 2018 03:54 PM
balanced input for any amplifier atmasphere Tubes / Valves 11 2nd October 2011 01:27 AM
Amplifier Suggestions. Class D. carshateme Car Audio 14 21st September 2011 04:14 PM
Balanced input headphone amplifier Mr. Triatic Headphone Systems 24 13th February 2011 07:53 PM


New To Site? Need Help?

All times are GMT. The time now is 10:31 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio
Wiki