These performance data are much more than conservative... +/- 110 are over than 1.2-1.3 KW @ 4 ohm
because in reality, there are losses (in form of heat) from transformer and from the amplifier device.
BA1000 with smps psu
VID 20131105 112525 - YouTube
VID 20131105 112525 - YouTube
Attachments
Here's the file for BA1200 Protect using NE555 IC....
Regards
Hello Sir Wiljj78... I have only 24volts coil supply of my available relay same type with this. Can u help me with what to change in parts for this protect?
Many thanks
Hello Sir Wiljj78... I have only 24volts coil supply of my available relay same type with this. Can u help me with what to change in parts for this protect?
Many thanks
Protect from post #28 can work with 24V without any change.
Protect from post #28 can work with 24V without any change.
Many thanks sir Mile...
Best Regards
Attachments
What is the maximum supply voltage for your version of the 555 timer chip?... I have only 24volts coil supply of my available relay same type with this.........
All my datasheets show Vsupply <= 18Vdc
What is the maximum supply voltage for your version of the 555 timer chip?
All my datasheets show Vsupply <= 18Vdc
With transistor add to NE555 out any relay voltage can be use.
Apex,With transistor add to NE555 out any relay voltage can be use.
I do not understand you reply.
Apex,
I do not understand you reply.
Supply voltage for NE555 is 5-15V
Protect Files...
Hello Sir Wiljj78.... can you share for the PCB of this not mirrored. I will use for tonner transfer.
Thanks & Regards
Protect from post #28 can work with 24V without any change.
Many thanks sir Mile...
Best Regards
What is the maximum supply voltage for your version of the 555 timer chip?
All my datasheets show Vsupply <= 18Vdc
With transistor add to NE555 out any relay voltage can be use.
Apex, are you expecting Boss to create a new LV supply from his 24Vdc supply, to power the timer chip?Supply voltage for NE555 is 5-15V
Looks like you need to show Boss how.
Apex, are you expecting Boss to create a new LV supply from his 24Vdc supply, to power the timer chip?
Looks like you need to show Boss how.
No, I expect from boss to made descrite circuit (without NE555) with 24V relay.
Protect from post #28 can work with 24V without any change.
how much DC will it accept ?
is that adjustable ?
how much DC will it accept ?
is that adjustable ?
Use DC voltage for protect same as ralay voltage or higher and add resistor in series with relay or use 2 relays in series with double DC voltage.
ahh, no, I meant how much DC on speaker out, before it shuts down ?
about +/-1V
You can use this simple DC protection with 40A relay (12V for car)
hello sir i made this protect but how to test that it is working or not please help me. . .
hello sir i made this protect but how to test that it is working or not please help me. . .
power supply for SR200 with speaker protection, thermal protection, Temperature controlled fans , transformer soft start , power supply for Sub- woofer crossover
Attachments
- Home
- Amplifiers
- Solid State
- 1000W Simple PA Amplifier