Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Class H simple amp schematics
Class H simple amp schematics
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 13th February 2002, 08:30 PM   #1
djdan is offline djdan  Romania
diyAudio Member
Join Date: Dec 2001
Location: Romania
Question Class H simple amp schematics

Dear DIYAUDIO members ,

I am interested in class H amplifier. Please, tell me ,where can I get more informations about this subject . I need a simple amplifier schematic , something no more 4 power devices.

Thank you in advance !
  Reply With Quote
Old 14th February 2002, 12:16 PM   #2
djk is offline djk
djk's Avatar
Join Date: Feb 2001
Location: USA
For reference, use the schematic here: http://www.passlabs.com/pdf/cascode.pdf page 4, figure 9. Assume a +/- 75V on the main rails, this will give 400W at 4R with a very lightly regulated supply.Assume a +/- 37V supply fed through a pair of fast diodes to the emitters of Q9 and Q10.Thats it.You're done.400W with only four output devices.
  Reply With Quote


Class H simple amp schematicsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any Simple CX310 SE schematics around? Trout Tubes / Valves 3 12th March 2009 12:38 AM
simple power supply schematics getafix Chip Amps 8 12th October 2007 10:41 AM
Simple fet amps schematics, suggestions? nikwal Solid State 0 3rd December 2006 10:51 AM
Beginners Project: Need a schematics for a small simple EL84 SE (or PSE) amp Erik Johansson Tubes / Valves 2 15th May 2002 12:35 PM

New To Site? Need Help?

All times are GMT. The time now is 11:43 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio