Bias Adjustment on Bose 1800 Amplifier

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
J

jamesdean

Member
Joined 2010
So I'm trying to set the bias according to the manual and I seem to be unable to see any current. Every time I adjust the pot the current spikes up then drops back down to 0 or .001mA. I assume I'm supposed to be monitoring DC current...

Here's the procedure:


Here's how I have it setup:
I removed the -85 lines and zip-tied the eyes together, then connected an alligator clip around them for the meter. I made a simple wire and attached the other alligator lead to the - terminal on the capacitor.



Same results for the other amp board.

I must be performing this procedure incorrectly. If anyone can let me know what I'm doing wrong, I'd appreciate it

Thanks!
Kris
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom