
Home  Forums  Rules  Articles  diyAudio Store  Blogs  Gallery  Wiki  Register  Donations  FAQ  Calendar  Search  Today's Posts  Mark Forums Read  Search 
Solid State Talk all about solid state amplification. 

Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving 

Thread Tools  Search this Thread 
30th March 2009, 04:35 PM  #1 
diyAudio Member
Join Date: Apr 2008
Location: Brezno (Abyss)

Decibel Watts VS Watts ?
Here`s a question for all amp wizards: just hypothetically, if we would have two otherwise identical loudspeakers, the only difference being the impedance rating (one 4 oHm, the other 8 oHm), driving them with an amp that is capable of 100 W into 8 oHms and 200 W into 4 oHms, which loudspeaker would achieve higher SPL with the same amp? Now, don`t forget that if we halve the impedance from 8 to 4 oHms, the thermal dissipation from the amp quadruples (and distortion level rises).
It is my suspicion that the only real significance to amplifier power is how many decibels of sound pressure it is capable of driving a speaker. Since speaker efficiencies are often specified as decibels with one watt of input, a more useful way of comparing amplifier output would be to reference their decibel output to one watt(dBW). This would give a much more accurate representation of amplifier output than the watt rating system. I fear that all this mighty watts talk serves only one purpose, the sales (and bragging) argument. The way I understand things (I might be wrong) there is no real advantage in 4 oHms load compared to 8 oHms, although the electrical power doubles, the maximum available SPL is actually a little lower into 4 oHms, even if you use monster power amps. For example there isn`t a single power amp from the Stereophile tests that would have higher dBW rating into lower impedances under the constant distortion requirement (1% THD+N) and dBW`s matter not watts, don`t they? Check any of them here: http://www.stereophile.com/solidpoweramps/ A "little" clarification would help http://www.ringbell.co.uk/info/dbw.htm http://www.giangrandi.ch/electronics...l/decibel.html 
30th March 2009, 05:09 PM  #2 
R.I.P.
Join Date: Nov 2003
Location: Brighton UK

Hi,
Seeing dBW's is related to the voltage output of an amplifier an amplifier will never have more dBW's into 4 ohms that it does 8. 4 ohm versus 8 ohm dBW's describes the voltage sag. Regarding your speaker question all things being equal the 4 ohm speaker will play 3dB louder. Amplifier dissapation is x 2 not x 4. /sreten. All things not being equal the 4ohm speaker could be the same level as the 8ohm but have more bass, or the same in a smaller cabinet. 
30th March 2009, 05:19 PM  #3 
R.I.P.
Join Date: Jul 2004
Location: Scottish Borders

sorry but you've got it a bit mixed up.
There are two standard ways to specify the sensitivity/efficiency of a speaker. 1.) SPL @ dB/m/W (this is real watts, not the equivalent of 2.83V into 8r0) 2.) SPL @ dB/m/2.83V (some manufactures adopt dB/m/2V for 4ohm drivers but this is relatively rare). Now look at your drive ability 100W (+20dBW) into 8r0 and 200W (+23dBW) into 4r0. Theoretically this is almost impossible but for this discussion I'll ignore that anomaly. Select a speaker that has this spec. 90dB/W/m Apply a maximum of 100W and the resulting SPL is 110dB/m less any compression effect. But this is putting 100real watts into a speaker without knowing it's impedance. Let's dissect the speaker rating. It is exactly 8ohms across the whole frequency range and you supply it with 28.3Vac. It still has a maximum SPL of 110dB/m less the same compression effect. If the speaker were really a 10ohm average across the whole frequency range and you apply 28.3Vac to it, you have available only 80W (+19dbW). The maximum SPL is 90+19=109dB less the same compression effect. The higher impedance has drawn less power from the amplifier and thus you end up with less SPL. Let's select a 4ohm speaker It's spec is 90dB/m/W. Apply 100W and you get 110dB/m less the compression effect. But to get this you only needed to use 20Vac to get that 110dB/m. Increase the applied voltage to 28.3V (equivalent to 200W into 4r0) and the power delivered is +23dBW. the maximum SPL is 90+23=113dB/m less that compression effect. The difficult bit in all of this is deciphering the manufacturers attempts to hide their real sensitivity if it suits their marketing. A 7ohm speaker that is really 90dB/m/W looks better in the spec sheet if it's been quoted as an 8ohm speaker and they quote a voltage sensitivity of 90.58dB/m/2.83V. Their speaker appears to be ~0.6dB more efficient than another manufacturer who makes a real 8ohm speaker. 4ohm speakers gain 3dB using this same voltage sensitivity ruse. Don't be fooled. Ask what they mean by W and 2.83W if you suspect they are at it.
__________________
regards Andrew T. 
31st March 2009, 11:41 AM  #4  
R.I.P.
Join Date: Nov 2003
Location: Brighton UK

Quote:
100W into 8 ohms and 200W into 4 ohms are both +20dBW. /sreten. 

31st March 2009, 12:10 PM  #5  
Banned
Join Date: Jan 2008

Quote:
w 

31st March 2009, 03:58 PM  #6  
diyAudio Member
Join Date: May 2005
Location: SoCal

Quote:
Simply wrong dBW is the ratio of power in watts to 1 Watt 10LOG (power in watts)/1watt
__________________
. . 

31st March 2009, 05:43 PM  #7 
R.I.P.
Join Date: Jul 2004
Location: Scottish Borders

Sreten was referring to dBV and got it mixed up with dBW.
__________________
regards Andrew T. 
31st March 2009, 05:56 PM  #8 
Banned
Join Date: Jan 2008

100W into 8 ohms and 200W into 4 ohms are both +20dBV?
w 
1st April 2009, 06:54 AM  #9 
diyAudio Member
Join Date: Apr 2008
Location: Brezno (Abyss)

Thank you guys for all your theories, but there seem to be no practical evidence that more SPL is possible into lower impedances, under equal loudspeaker conditions. It seems we only get more heat (dissipation) from amps
"Evolution 600 was a powerhouse, clipping with continuous drive at 610W into 8 ohms (27.85dBW), 1190W into 4 ohms (27.75dBW), and 2.2kW into 2 ohms (27.4dBW). I don't hold my AC wall voltage constant for these tests; at 125.8V with the amplifier quiescent, it had dropped to 121.8V with the amplifier clipping into 4 ohms, 119V with it clipping into 2 ohms. With its S/N ratio (input shorted, ref. 1W into 8 ohms) of 81.7dB (wideband, unweighted) improving to 92.3dB when Aweighted, the Evolution 600 offers a superbly wide dynamic range that well exceeds that of the 16bit CD medium. " http://stereophile.com/solidpoweramp...ll/index4.html 
1st April 2009, 12:23 PM  #10  
R.I.P.
Join Date: Nov 2003
Location: Brighton UK

Quote:
No. There is ample evidence a 4ohm speaker can exploit the extra current and hence power from an amplifier. If speaker efficiencies are the same it will be +3dB louder. /sreten. 

Thread Tools  Search this Thread 


Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
ESP 60 watts  Williams Audio  Solid State  12  28th April 2010 01:54 PM 
watts vs watts  Hayden  Parts  7  30th July 2006 01:57 AM 
Sound quality of amps at 0.3 watts vs @ typical 5 watts  rick57  Solid State  2  26th March 2005 07:25 AM 
SPL and Watts  Matttcattt  Everything Else  6  14th March 2004 11:00 PM 
Need 2 watts  Vivek  Everything Else  4  17th July 2003 09:29 AM 
New To Site?  Need Help? 