diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Solid State (https://www.diyaudio.com/forums/solid-state/)
-   -   Pure Class A Single End Amplifier Idea! (https://www.diyaudio.com/forums/solid-state/105410-pure-class-single-amplifier-idea.html)

AndrewT 31st August 2008 05:31 PM

Quote:

Originally posted by homemodder
Hey lineup, was addressed to you, but sorry I misread what you wrote, you talking about VCE balancing, my answer adresses IC balancing.
But the point still applies.
Select well matched devices and run them with unbalanced Vce and the carefully matched parameters no longer work for you, operationally

destroyer X 1st September 2008 10:54 AM

Listen to Hugh fellows, the guys is not young, very experienced
 

and the most important, well succeded.... he made a name and a product sold around the world, others want to be so good as he is, and tested, proved real world, but can only talk about academic things having not a name and a position into this world...people trying to be.

Hugh already IS...he made himself working hard and knows that you can only understand the whole thing doing and trying the modifications...while others goes imagining..he knows.

Read with attention what he say....mathematics and theories are needed to calculate circuits...to make them sound good you have the second step, to learn how each circuit sounds and the combination of those things.

I motor, a machine can have turbo charger, especial overhead control to valves, incredible exaust tubes, polished input tubes, compressor, fuel injection, electronic controled injection and ignition... computer monitored exausted gazes, controled ignition point timing......BUT...if pistons have different weigth, the motor will vibrate and will not develop the full power could develop because of this detail....also the audio happens this way.

Attention once again folks..... Hugh have made a product and a name..has a factory, a brand, a respectable equipment sold around the world by happy and satisfied customers...others....well...others are very good too.....but examine what they have provided you as diy product..observe what they have made.

Hugh is a tested....he is not trying to be under the spot ligth...he is already a star.

Listen to Hugh... read what he say..... well... listen to everybody...but test them.... watch what they have done.... some speaks, speaks... and do nothing.

All i know was because of forum, and i learned the ones have consistence and the others have formulas..... because of Hugh i could give my second step up into the direction of the knowledge..others goes analising the cement that was used to construct the stair.

regards,

Carlos


All times are GMT. The time now is 11:43 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio

Wiki