Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Krell KSA-150 will not turn on
Krell KSA-150 will not turn on
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 30th May 2007, 09:42 PM   #1
Doral is offline Doral  United States
diyAudio Member
Join Date: May 2007
Hello. I am looking for a schematic for a KSA-150. ANATECH : I see you have a schematic of the control board, but I cannot make out the components. Mine will not come on because it simply fries the 4 - 10ohm resistors immediately. Someone else has had their hands in this one, so I am not even sure the 110/220 switches are in the correct position. I tried to start a new post, but it will not let me since this has some of the same info.
  Reply With Quote
Old 31st May 2007, 03:00 AM   #2
anatech is offline anatech  Canada
diyAudio Moderator
anatech's Avatar
Join Date: Jun 2004
Location: Georgetown, On
Krell KSA-150 will not turn on
Default Your new thread

Hi Doral,
Okay, I split this off for you. There was a small box on the upper right asking you to check it if you have already searched.

First, check your mains settings. I'm going to bet that you have a short somewhere in the power supply or amp sections. This would cause the surge relays to remain off and allow the resistors to burn. This is from memory because I can't find a diagram of the primary circuit at this moment.

"Just because you can, doesn't mean you should" my Wife
  Reply With Quote


Krell KSA-150 will not turn onHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Krell KSA-300S will not turn on fcel Solid State 54 26th March 2015 03:01 PM
Full-turn/partial-turn pots slowpogo Parts 1 12th January 2007 07:40 AM
How can I reduce mechanical turn on and turn off noise? soundNERD Chip Amps 8 28th October 2003 01:43 AM

New To Site? Need Help?

All times are GMT. The time now is 11:01 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio