Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Software Tools SPICE, PCB CAD, speaker design and measurement software, calculators

REW tweaking of synergy
REW tweaking of synergy
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 22nd March 2020, 11:53 AM   #1
Droco is offline Droco
diyAudio Member
 
Join Date: Oct 2017
Default REW tweaking of synergy

Hey guys

I build a synergy horn using a huge 109x75 horn designed by Don Keele (I actually have the original prototypes).

89436000_2621238424640166_7595298124197789696_n.jpg

It uses a JBL 2447 1.5" compression driver and a single 12" Beyma 12P80Fe. Anyone interested in taking a look and making some suggestions? Sadly this was measured inside, and I will not be able to bring them outside for quite a while. I included a google drive link, hope it works: 1 meter vs 2 meter _ sealed vs ported.mdat - Google Drive

At this moment the synergy is vertically alligned, not ideal but at the moment the best option due to size. I measured the right one today. This was the one I built first, and also has a port which fires out from the top over the whole width, very close to the mouth (where the drilling machine lays in the picture).

Any thing you can note from the measurements? Some notes:

-80-17khz right now. I might boost the sealed option to also achieve more output down to 60hz.

- the measurement of the ported option included for reference.

- I'm particularily intersted in the huge change when moving away from the horn. The LF response gets completely 'distorted' Maybe because of the slit being positioned on the top, firing down? At 1 meter the mic would pick up more direct, and 1 meter a lot more would be reflected.

- as mentioned in the REW files, the 900hz XO is only there to block out the peaks beyond the 700hz xo from LF to HF. The crossover from high to low happens at 700hz, with the LF rolling of on its own.

- I calculated a 0.120ms delay based on the acoustic reference option from REW. Is there anything in the files that can confirm the delay is adequate? I doubt its correct though.
  Reply With Quote

Reply


REW tweaking of synergyHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help With Tweaking swantzilla Multi-Way 0 12th May 2011 06:47 PM
what CD buy for tweaking? LennyK Digital Source 0 29th July 2005 08:50 AM
Help with car amp tweaking sq_guy Car Audio 15 7th May 2005 04:14 AM
DIY Amp Tweaking choatie88 Solid State 4 15th September 2004 10:16 PM


New To Site? Need Help?

All times are GMT. The time now is 03:36 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio
Wiki