DATS Hardware with ARTA LIMP

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
One can use DATS v3 successfully with LIMP.

Yellow curve is measured with a sweep on DATS software and green curve with stepped sine on LIMP with reference resistor set to 101 ohm.
 

Attachments

  • DATS_v3+ARTA.jpg
    DATS_v3+ARTA.jpg
    150.5 KB · Views: 104
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.