VituixCAD

[kimmosto]

This is probably total off-topic, but speaker concept is not the key to good sound reproduction. Studying and building different designs, concepts, radiators, amount and type of directivity could be interesting hobby, but final solution comes with room acoustics. Shortening early delay time etc. until acoustic resolution reaches personal preference. No speaker concept is able to beat that. High quality components, construction and radiators without excessive directivity at HF to avoid spitting of artificial details.

[kimmosto]

Originally Posted by kimmosto

delay

decay

[kimmosto]

2.0.60.0 (2021-01-15)

Main
* Rotate command moved from context menu to R button below schematic.
* Single component is possible to rotate with right click while dragging.
* Wire stretching while component movement is controlled with Stretch checkbox. Was earlier by pressing Alt-key while movement.
* Coordinate text boxes and zooming 1:1 and Fit buttons moved up a bit to make some room.

[celef]

and radiators without excessive directivity at HF to avoid spitting of artificial details

can you give some examples of poor hf directivity?

[kimmosto]

^No names, but generally ring radiator, long planar/ribbon and horn requires very high quality driver to avoid spitting HF resonances to your face.
"Soft/damped" conventional metal dome with diffuser is not so directive requiring better room acoustics (=low EDT) for adequate acoustic resolution, but could also be higher quality due to low resonances at HF.

[kimmosto]

2.0.60.0 build 2021-01-16
Tiny adjustment to wire stretch mode: Pressing Shift key while dragging inverts wire Stretch mode on the fly. Status of Stretch checkbox is saved to user settings.

Now it's very close to original function (with Alt key) but enables selection of default mode.