Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Software Tools SPICE, PCB CAD, speaker design and measurement software, calculators

Better power MOSFET models in LTSpice
Better power MOSFET models in LTSpice
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 4th July 2019, 12:58 AM   #271
IanHegglun is offline IanHegglun  Australia
diyAudio Member
 
Join Date: Mar 2017
Default Update of all my earlier VDMOS models

Hi All,

There were typos and minor mistakes in a few of my VDMOS model updates with the new temp cos so I have fixed them and posted them all here. VDMOS - PAK2 devo
until they are rechecked, then I can use an embedded code box. Please let me know if you find any typos or bad values etc. My earlier models are still good enough for most sims.

I have updated all my earlier VDMOS models with new body diode parameters that use the new temp co parameter Trb1. This is helpful for SSR's (for SS speaker protection relays) and catch diode simulation (SOA sims).

BTW my link above has the models in both LT-IV compatible format (without the new temp co params) as well as the new LT-XVII model format. I use LT-IV but have checked my new LT-XVII model on a friends PC.

I found is an issue with LT-XVII. If you run the files with LT-IV that are save using LT-XVII the file runs but you lose all the plot information (plot data is not backward compatible). I'll try and remember to add separate plot files for LT-IV users in the above download. Rename/remove the "-IV" part but first delete the other .plt file).
  Reply With Quote
Old 11th July 2019, 10:49 PM   #272
IanHegglun is offline IanHegglun  Australia
diyAudio Member
 
Join Date: Mar 2017
Quote:
Originally Posted by IanHegglun View Post
Hi All,
I have updated all my earlier VDMOS models with new body diode parameters that use the new temp co parameter Trb1.
Hi All, More updates completed. Now all 24 done.

I measured the Exicon lateral body diodes at 25C and 27C. They are better now. The ZVN2110G, ZVNP2110G and VN88AFD datasheets did not have any body diode info so I found the ZVNL110G and ZVP4525G are similar devices had diode plots so I used those.

Until the are re-checked all 24 the models are the 1st download on my VDMOS page here VDMOS - PAK2 devo
  Reply With Quote
Old 20th July 2019, 10:20 AM   #273
astx is offline astx  Austria
diyAudio Member
 
Join Date: Jan 2011
Location: Tyrol / Austria
Better power MOSFET models in LTSpice
Wow! Many thx providing the models!


BR, Toni
__________________
Hint: have a look at first post of my threads for an updated index!
  Reply With Quote
Old 6th August 2019, 04:58 AM   #274
IanHegglun is offline IanHegglun  Australia
diyAudio Member
 
Join Date: Mar 2017
Default Updated VMOS models for LTXVII

Quote:
Originally Posted by astx View Post
Wow! Many thx providing the models!
BR, Toni
Hi Toni, thanks for the thanks.

Here's the updated DMOS models for the new temp.co's for LT-XVII. Laterals are in a following post.
Code:
*VDMOS with subthreshold (c) Ian Hegglun
.model IRFP240h VDMOS (Rg=17 Vto=4.0 Kp=6 Lambda=3m
+ Rs=40m Ksubthres=0.15 Mtriode=0.35 Rd=0.15
+ Bex=-2.3 Vtotc=-6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=1.3n Cgdmin=10p a=0.35 Cgs=1.2n Cjo=1n
+ m=0.4 VJ=0.75 IS=10n N=1.5 Eg=1.1 Rb=10m Trb1=3m
+ Vds=200 Ron=0.15 Qg=45nC mfg=VishIH1907)

*VDMOS with subthreshold (c) Ian Hegglun
.model IRFP9240h VDMOS (pchan Rg=9 Vto=-3.76 Kp=9
+ Rs=64m Ksubthres=0.15 Mtriode=0.2 Rd=0.25 Lambda=4m
+ Bex=-2.3 Vtotc=+6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=1.6n Cgdmin=30p a=0.5 Cgs=1.4n Cjo=1n
+ m=0.4 Vj=0.75 N=7 Is=10u Eg=3.15  Rb=50m Trb1=0
+ Vds=-200 Ron=0.5 Qg=44nC mfg=VishIH1907)

****
*VDMOS with subthreshold (c) Ian Hegglun
.model IRF640 VDMOS (Rg=17 Vto=4.0 Kp=6 Lambda=3m
+ Rs=40m Ksubthres=0.15 Mtriode=0.35 Rd=0.15
+ Bex=-2.3 Vtotc=-6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=1.3n Cgdmin=10p a=0.35 Cgs=1.2n Cjo=1n
+ m=0.4 VJ=0.75 IS=10n N=1.5 Eg=1.1 Rb=10m Trb1=3m
+ Vds=200 Ron=0.15 Qg=45nC mfg=VishIH1907)

*VDMOS with subthreshold (c) Ian Hegglun
.model IRF9640 VDMOS (pchan Rg=9 Vto=-3.76 Kp=9
+ Rs=64m Ksubthres=0.15 Mtriode=0.2 Rd=0.25 Lambda=4m
+ Bex=-2.3 Vtotc=+6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=1.6n Cgdmin=30p a=0.5 Cgs=1.4n Cjo=1n
+ m=0.4 Vj=0.75 N=7 Is=10u Eg=3.15  Rb=50m Trb1=0
+ Vds=-200 Ron=0.5 Qg=44nC mfg=VishIH1907)

****
*VDMOS with subthreshold (c) Ian Hegglun
.model IRF610h VDMOS (Rg=20 Vto=4.30 Kp=0.5
+ Rs=35m Ksubthres=0.23 Mtriode=0.35 Rd=1 Lambda=3m
+ Bex=-2.4 Vtotc=-6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=260p Cgdmin=10p a=0.35 Cgs=125p Cjo=120p
+ m=0.3 VJ=0.75 IS=4n N=1.5 Eg=1.05 Rb=0.06 Trb1=2.5m
+ Vds=200 Ron=1.5 Qg=8nC mfg=VishIH1907)

*VDMOS with subthreshold (c) Ian Hegglun
.model IRF9610h VDMOS (pchan Rg=6 Vto=+3.76 Kp=0.35
+ Rs=68m Ksubthres=0.2 Mtriode=0.5 R-d=2 Lambda=4m
+ Bex=-1 Vtotc=+2.5m Tksubthres1=4m Trs1=3m Trd1=9m
+ Cgdmax=120p Cgdmin=15p a=0.26 Cgs=113p Cjo=207p
+ m=0.4 VJ=2.5 IS=1.3f N=4.2 Eg=4.5 Rb=0.02 Trb1=1.3m
+ Vds=-200 Ron=3 Qg=11nC mfg=VishIH1907)

**************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model IRF9520 VDMOS (pchan Rg=11 Vto=-3.76 Kp=3.5
+ Rs=0.16 Ksubthres=0.15 Mtriode=0.5 Rd=0.2 Lambda=30m
+ Bex=-1.6 Vtotc=+3m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=700p Cgdmin=1u a=0.2 Cgs=250p Cjo=400p
+ m=0.4 Vj=0.75 Is=3u N=6 Eg=2.8 Rb=0.1 Trb1=200u
+ Vds=-100 Ron=0.6 Qg=18nC mfg=VishIH1907)

**************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model IRF9620 VDMOS (pchan Rg=5 Vto=-3.76 Kp=1.2
+ Rs=0.13 Ksubthres=0.15 Mtriode=0.5 Rd=1 Lambda=3m
+ Bex=-1.6 Vtotc=+3m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=680p Cgdmin=10p a=0.2 Cgs=350p Cjo=200p
+ m=0.4 Vj=0.75 Is=0.5n N=6 Eg=3.6 Rb=0.7 Trb1=0m
+ Vds=-200 Ron=1.5 Qg=22nC mfg=VishIH1907)

**************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model IRFP340 VDMOS (Rg=5 Vto=3.9 Kp=7.3 Lambda=3m
+ Rs=35m Ksubthres=0.15 Mtriode=0.2 Rd=0.3
+ Bex=-2.4 Vtotc=-6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=1.8n Cgdmin=20p a=0.35 Cgs=1.4n Cjo=0.9n
+ m=0.5 Vj=0.75 Is=0.5n N=1.3 Eg=1.15 Rb=0.01 Trb1=3m
+ Vds=400 Ron=0.5 Qg=62nC mfg=VishIH1907)

*VDMOS with subthreshold (c) Ian Hegglun
.model IRFP9140 VDMOS (pchan Rg=10 Vto=-3.76 Kp=12
+ Rs=35m Ksubthres=0.15 Mtriode=0.25 Rd=0.1 Lambda=4m
+ Bex=-2.4 Vtotc=+6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=1800p Cgdmin=50p a=0.5 Cgs=900p Cjo=1400p
+ m=0.5 Vj=0.75 Is=5u N=6 Eg=3 Rb=35m Trb1=1m
+ Vds=-100 Ron=0.2 Qg=61nC mfg=VishIH1907)

****************************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model IRF710 VDMOS (Rg=5 Vto=4.40 Kp=0.5
+ Rs=35m Ksubthres=0.23 Mtriode=0.2 Rd=3 Lambda=3m
+ Bex=-2.4 Vtotc=-6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=260p Cgdmin=10p a=0.35 Cgs=150p Cjo=120p
+ m=0.5 VJ=0.75 IS=100p N=1.3 Eg=1.15 Rb=50m Trb1=4m
+ Vds=400 Ron=3.6 Qg=17nC mfg=VishIH1907)

****************************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model IRF730 VDMOS (Rg=5 Vto=4.0 Kp=3.1 Lambda=2m
+ Rs=65m Ksubthres=0.2 Mtriode=0.9 Rd=0.7
+ Bex=-2.4 Vtotc=-6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=1.2n Cgdmin=5p a=0.25 Cgs=500p Cjo=450p
+ m=0.5 Vj=0.75 IS=0.3n N=1.3 Eg=1.15 Rb=0.02 Trb1=3m
+ Vds=400 Ron=1 Qg=38nC mfg=VishIH1907)

***************************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model IRFP150N VDMOS (Rg=2 Vto=3.5 Kp=44
+ Rs=5m Ksubthres=0.15 Mtriode=1 Rd=20m Lambda=3m
+ Bex=-1.25 Vtotc=-4m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=2n Cgdmin=100p a=0.35 Cgs=2n Cjo=2n
+ m=0.4 VJ=0.75 IS=10n N=1.5 Eg=1.35 Rb=3m Trb1=4m
+ Vds=100 Ron=30m Qg=90nC mfg=VishIH1908)

***************************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model 2SK1530h VDMOS (Rg=35 Vto=1.6 Kp=11 
+ Rs=25m Ksubthres=0.1 Mtriode=0.35 Rd=0.1 Lambda=2m
+ Bex=-2.2 Vtotc=-5m Tksubthres1=0 Trs1=3m Trd1=3m
+ Cgdmax=1500p Cgdmin=15p a=0.33 Cgs=880p Cjo=300p 
+ m=0.5 VJ=0.75 IS=10n N=1.5 Eg=1.1 Rb=0.03 Trb1=3m
+ Vds=200 Ron=0.2 mfg=IH1907)

****
*VDMOS with subthreshold (c) Ian Hegglun
.model 2SJ201h VDMOS (pchan Rg=30 Vto=-1.5 Kp=4.7
+ Rs=40m Ksubthres=0.1 Mtriode=0.5 Rd=0.07 Lambda=2m
+ Bex=-1.5 Vtotc=+5m Tksubthres1=0 Trs1=0m Trd1=3m
+ Cgdmax=2.4n Cgdmin=55p a=0.34 Cgs=1.5n Cjo=1n m=0.5 VJ=0.75
+ IS=10u N=7 Eg=3 Rb=0.05 Trb1=0m
+ Vds=-200 Ron=0.15 mfg=IH1907)
***************************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model ZVN2110G VDMOS (Rg=200 Vto=2.0 Kp=0.38
+ Rs=0.4 Ksubthres=0.15 Mtriode=0.5 Rd=2.5 Lambda=2.6m
+ Bex=-1.7 Vtotc=-6m Tksubthres1=4m Trs1=3.5m Trd1=5m
+ Cgdmax=65p Cgdmin=2p a=0.3 Cgs=90p Cjo=25p
+ m=0.5 Vj=0.75 Is=0.1n N=1.3 Eg=1.2 Rb=0.2 Trb1=2m
+ Vds=100 Ron=4 Qg=1.6nC mfg=DioIncIH1907)

****
*VDMOS with subthreshold (c) Ian Hegglun
.model ZVP2110G VDMOS (pchan Rg=65 Vto=-2.8 Kp=0.17
+ Rs=2 Ksubthres=0.15 Mtriode=0.5 Rd=2.5 Lambda=6m
+ Bex=-2.3 Vtotc=+6m Tksubthres1=4m Trs1=3.5m Trd1=8m
+ Cgdmax=20p Cgdmin=3p a=0.5 Cgs=140p Cjo=50p
+ m=0.5 Vj=0.75 Is=5p N=3 Eg=2.8 Rb=1 Trb1=1m
+ Vds=-100 Ron=8 Qg=2nC mfg=DioIncIH1907)

***************************************************************
*VDMOS with subthreshold (c) Ian Hegglun
.model VN88AFD VDMOS (Rg=1 Vto=1.25 Kp=0.41
+ Rs=3 Ksubthres=0.4 Mtriode=1 Rd=0.1 Lambda=0m
+ Bex=-2.4 Vtotc=-3.5m Tksubthres1=1m Trs1=1m Trd1=1m
+ Cgdmax=10p Cgdmin=0.7p a=1 Cgs=35p Cjo=25p
+ m=0.75 VJ=5 IS=0.1n N=1.3 Eg=1.2 Rb=0.15 Trb1=2m
+ Vds=80 Ron=4 Qg=0.5nC mfg=VishIH1907)

***************************************************************
*VDMOS with subthreshold (c) IanH and keantoken
.model DN2540 VDMOS (Rg=1 Vto=-1.50 Kp=0.82 Lambda=8m
+ Rs=0.3 Ksubthres=0.11 Mtriode=0.8 Rd=10
+ Bex=-1.9 Vtotc=-0.8m Tksubthres1=1m Trs1=3m Trd1=3m
+ Cgdmax=150p Cgdmin=10p a=0.7 Cgs=60p Cjo=150p m=0.75 VJ=0.75 
+ IS=1n N=1.6 Eg=1.2 Rb=10 Vds=400 Ron=17 mfg=IHKT1907)

****
*VDMOS with subthreshold (c) IanH and keantoken
.model DN2530 VDMOS (Rg=1 Vto=-1.5 Kp=0.82 Lambda=8m
+ Rs=0.3 Ksubthres=0.11 Mtriode=0.8 Rd=5 
+ Bex=-1.9 Vtotc=-0.8m Tksubthres1=4m Trs1=3m Trd1=3m
+ Cgdmax=170p Cgdmin=15p a=0.7 Cgs=100p Cjo=130p m=0.75 VJ=0.75
+ IS=1n N=1.6 Eg=1.2 Rb=5 Vds=300 Ron=12 mfg=IHKT1907)

****
*VDMOS (c) Copyright Ian Hegglun Jul 2019 
.model LND150 VDMOS (Rg=100 Vto=-2 Lambda=0m
+ Rs=70 Kp=3m Ksubthres=95m Mtriode=0.6 Rd=300
+ Bex=-2 Vtotc=-5m Tksubthres1=3m Trs1=2.6m Trd1=3m 
+ Cgdmax=5p Cgdmin=3p a=0.3 Cgs=3p Cjo=15p m=0.7 VJ=0.75
+ IS=15p N=1.5 EG=1.1 Rb=100 Vds=400 Ron=600 mfg=IH1907)
Legacy LT-IV models are also available - see my PAKproject link >Spice Models>VDMOS

Last edited by IanHegglun; 6th August 2019 at 05:16 AM. Reason: add link
  Reply With Quote
Old 6th August 2019, 05:12 AM   #275
IanHegglun is offline IanHegglun  Australia
diyAudio Member
 
Join Date: Mar 2017
Default Updated lateral's models for LTXVII

Hi All,
Code:
*VDMOS + subthreshold (c) IanH & keantoken
.model 10N20 VDMOS (Rg=60 Vto=0.17 Kp=1.3 Lambda=3m
+ Rs=0.245 Ksubthres=0.095 Mtriode=0.3 Rd=0.6
+ Bex=-2 Vtotc=-1.6m Tksubthres1=2.9m Trs1=2.6m Trd1=3m
+ Cgdmax=100p Cgdmin=5p a=0.25 Cgs=600p Cjo=500p m=0.7 VJ=0.75
+ IS=4n N=1 Eg=1.5 Rb=0.2 Trb1=1m Vds=200 Ron=1 mfg=IHKT1907)

*VDMOS with subthreshold (c) IanH & keantoken
.model 10P20 VDMOS (pchan Rg=60 Vto=-0.535 Kp=0.995
+ Rs=0.37 Ksubthres=0.12 Mtriode=0.4 Rd=0.2 Lambda=5m
+ Bex=-2 Vtotc=+1.7m Tksubthres1=3.1m Trs1=3.4m Trd1=0
+ Cgdmax=100p Cgdmin=5p a=0.25 Cgs=600p Cjo=500p m=0.7 VJ=0.75
+ IS=4u N=2.4 Eg=1 Rb=1 Vds=-200 Ron=1 mfg=IHKT1907)

****
*VDMOS with subthreshold (c) IanH & keantoken
.model 20N20 VDMOS (Rg=30 Vto=0.155 Kp=2.4 Lambda=3m
+ Rs=0.12 Ksubthres=0.09 Mtriode=0.3 Rd=0.16 
+ Bex=-1.9 Vtotc=-1.6m Tksubthres1=1m Trs1=2.5m Trd1=3m
+ Cgdmax=200p Cgdmin=10p a=0.25 Cgs=1.2n Cjo=1n m=0.7 VJ=0.75
+ IS=8n N=1 Eg=1.5 Rb=0.1 Vds=200 Ron=0.5 mfg=IHKT1907)

*VDMOS with subthreshold (c) IanH & keantoken
.model 20P20 VDMOS (pchan Rg=30 Vto=-0.61 Kp=1.85
+ Rs=0.17 Ksubthres=0.105 Mtriode=0.35 Rd=0.05 Lambda=5m
+ Bex=-2 Vtotc=+2.2m Tksubthres1=5m Trs1=2m Trd1=0
+ Cgdmax=200p Cgdmin=10p a=0.25 Cgs=1200p Cjo=1n m=0.7 VJ=0.75
+ IS=8u N=2.4 Eg=1 Rb=0.5 Vds=-200 Ron=0.5 mfg=IHKT1907)

***************************************************
*VDMOS with subthreshold (c) IanH
.model 2SK1058h VDMOS (Rg=60 Vto=0.05 Kp=0.6 Lambda=3m
+ Rs=0.245 Ksubthres=0.095 Mtriode=0.3 Rd=0.6
+ Bex=-2.3 Vtotc=-1.6m Tksubthres1=0m Trs1=0m Trd1=3m
+ Cgdmax=100p Cgdmin=5p a=0.25 Cgs=600p Cjo=500p
+ m=0.7 VJ=0.75 IS=4n N=1 Eg=1.5 Rb=0.2 Vds=160 mfg=IH1908)

*VDMOS with subthreshold (c) IanH
.model 2SJ162h VDMOS (pchan Rg=60 Vto=-0.02 Kp=0.6 Lambda=5m
+ Rs=0.37 Ksubthres=0.12 Mtriode=0.4 Rd=0.2
+ Bex=-2.2 Vtotc=+1.5m Tksubthres1=0m Trs1=0m Trd1=3m
+ Cgdmax=215p Cgdmin=10p a=0.25 Cgs=900p Cjo=700p
+ m=0.7 VJ=0.75 IS=4u N=2.4 Eg=1 Rb=1 Vds=160 mfg=IHBC1908)

****
*VDMOS with subthreshold (c) IanH
.model 2SK134h VDMOS (Rg=60 Vto=0.05 Kp=0.6 Lambda=3m
+ Rs=0.245 Ksubthres=0.095 Mtriode=0.3 Rd=0.6
+ Bex=-2.3 Vtotc=-1.6m Tksubthres1=0m Trs1=0m Trd1=3m
+ Cgdmax=100p Cgdmin=5p a=0.25 Cgs=600p Cjo=500p
+ m=0.7 VJ=0.75 IS=4n N=1 Eg=1.5 Rb=0.2 Vds=140 mfg=IHBC1908)

*VDMOS with subthreshold (c) IanH
.model 2SJ49h VDMOS (pchan Rg=60 Vto=-0.02 Kp=0.6 Lambda=5m
+ Rs=0.37 Ksubthres=0.12 Mtriode=0.4 Rd=0.2
+ Bex=-2.2 Vtotc=+1.5m Tksubthres1=0m Trs1=0m Trd1=3m
+ Cgdmax=215p Cgdmin=10p a=0.25 Cgs=900p Cjo=700p
+ m=0.7 VJ=0.75 IS=4u N=2.4 Eg=1 Rb=1 Vds=140 mfg=IHBC1908)
Legacy LT-IV models are also available - see my PAKproject link >Spice Models>VDMOS
  Reply With Quote
Old 6th August 2019, 04:20 PM   #276
Bob Cordell is offline Bob Cordell  United States
diyAudio Member
 
Join Date: Sep 2006
Quote:
Originally Posted by IanHegglun View Post
Hi All,
Code:
*VDMOS + subthreshold (c) IanH & keantoken
.model 10N20 VDMOS (Rg=60 Vto=0.17 Kp=1.3 Lambda=3m
+ Rs=0.245 Ksubthres=0.095 Mtriode=0.3 Rd=0.6
+ Bex=-2 Vtotc=-1.6m Tksubthres1=2.9m Trs1=2.6m Trd1=3m
+ Cgdmax=100p Cgdmin=5p a=0.25 Cgs=600p Cjo=500p m=0.7 VJ=0.75
+ IS=4n N=1 Eg=1.5 Rb=0.2 Trb1=1m Vds=200 Ron=1 mfg=IHKT1907)

*VDMOS with subthreshold (c) IanH & keantoken
.model 10P20 VDMOS (pchan Rg=60 Vto=-0.535 Kp=0.995
+ Rs=0.37 Ksubthres=0.12 Mtriode=0.4 Rd=0.2 Lambda=5m
+ Bex=-2 Vtotc=+1.7m Tksubthres1=3.1m Trs1=3.4m Trd1=0
+ Cgdmax=100p Cgdmin=5p a=0.25 Cgs=600p Cjo=500p m=0.7 VJ=0.75
+ IS=4u N=2.4 Eg=1 Rb=1 Vds=-200 Ron=1 mfg=IHKT1907)

****
*VDMOS with subthreshold (c) IanH & keantoken
.model 20N20 VDMOS (Rg=30 Vto=0.155 Kp=2.4 Lambda=3m
+ Rs=0.12 Ksubthres=0.09 Mtriode=0.3 Rd=0.16 
+ Bex=-1.9 Vtotc=-1.6m Tksubthres1=1m Trs1=2.5m Trd1=3m
+ Cgdmax=200p Cgdmin=10p a=0.25 Cgs=1.2n Cjo=1n m=0.7 VJ=0.75
+ IS=8n N=1 Eg=1.5 Rb=0.1 Vds=200 Ron=0.5 mfg=IHKT1907)

*VDMOS with subthreshold (c) IanH & keantoken
.model 20P20 VDMOS (pchan Rg=30 Vto=-0.61 Kp=1.85
+ Rs=0.17 Ksubthres=0.105 Mtriode=0.35 Rd=0.05 Lambda=5m
+ Bex=-2 Vtotc=+2.2m Tksubthres1=5m Trs1=2m Trd1=0
+ Cgdmax=200p Cgdmin=10p a=0.25 Cgs=1200p Cjo=1n m=0.7 VJ=0.75
+ IS=8u N=2.4 Eg=1 Rb=0.5 Vds=-200 Ron=0.5 mfg=IHKT1907)

***************************************************
*VDMOS with subthreshold (c) IanH
.model 2SK1058h VDMOS (Rg=60 Vto=0.05 Kp=0.6 Lambda=3m
+ Rs=0.245 Ksubthres=0.095 Mtriode=0.3 Rd=0.6
+ Bex=-2.3 Vtotc=-1.6m Tksubthres1=0m Trs1=0m Trd1=3m
+ Cgdmax=100p Cgdmin=5p a=0.25 Cgs=600p Cjo=500p
+ m=0.7 VJ=0.75 IS=4n N=1 Eg=1.5 Rb=0.2 Vds=160 mfg=IH1908)

*VDMOS with subthreshold (c) IanH
.model 2SJ162h VDMOS (pchan Rg=60 Vto=-0.02 Kp=0.6 Lambda=5m
+ Rs=0.37 Ksubthres=0.12 Mtriode=0.4 Rd=0.2
+ Bex=-2.2 Vtotc=+1.5m Tksubthres1=0m Trs1=0m Trd1=3m
+ Cgdmax=215p Cgdmin=10p a=0.25 Cgs=900p Cjo=700p
+ m=0.7 VJ=0.75 IS=4u N=2.4 Eg=1 Rb=1 Vds=160 mfg=IHBC1908)

****
*VDMOS with subthreshold (c) IanH
.model 2SK134h VDMOS (Rg=60 Vto=0.05 Kp=0.6 Lambda=3m
+ Rs=0.245 Ksubthres=0.095 Mtriode=0.3 Rd=0.6
+ Bex=-2.3 Vtotc=-1.6m Tksubthres1=0m Trs1=0m Trd1=3m
+ Cgdmax=100p Cgdmin=5p a=0.25 Cgs=600p Cjo=500p
+ m=0.7 VJ=0.75 IS=4n N=1 Eg=1.5 Rb=0.2 Vds=140 mfg=IHBC1908)

*VDMOS with subthreshold (c) IanH
.model 2SJ49h VDMOS (pchan Rg=60 Vto=-0.02 Kp=0.6 Lambda=5m
+ Rs=0.37 Ksubthres=0.12 Mtriode=0.4 Rd=0.2
+ Bex=-2.2 Vtotc=+1.5m Tksubthres1=0m Trs1=0m Trd1=3m
+ Cgdmax=215p Cgdmin=10p a=0.25 Cgs=900p Cjo=700p
+ m=0.7 VJ=0.75 IS=4u N=2.4 Eg=1 Rb=1 Vds=140 mfg=IHBC1908)
Legacy LT-IV models are also available - see my PAKproject link >Spice Models>VDMOS
Thanks Ian - Nice sets of models!

Cheers,
Bob
  Reply With Quote
Old 6th August 2019, 04:33 PM   #277
RCruz is offline RCruz  Switzerland
nhinstruments
diyAudio Member
 
RCruz's Avatar
 
Join Date: Sep 2006
Location: Wallis
Better power MOSFET models in LTSpice
Thank you Ian
__________________
RC
  Reply With Quote

Reply


Better power MOSFET models in LTSpiceHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LTSpice tube models Osvaldo de Banfield Software Tools 27 26th October 2013 06:04 AM
LTSpice models needed popilin Tubes / Valves 6 25th April 2013 12:08 AM
Adding models in LTSpice danny92 Software Tools 1 13th April 2013 10:05 PM
Ltspice and Valve models Melon Head Software Tools 3 18th October 2009 08:35 AM
2SJ and 2SK Power Mosfet Spice Models Requested alaskanaudio Everything Else 4 14th December 2001 01:14 AM


New To Site? Need Help?

All times are GMT. The time now is 07:55 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki