• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

TSSA V1.6 docs and buyers list

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi all.

The TSSA V1.6 is the final production ready amp.

The component list for the amp is:

http://sitosite.dk/amps/TSSA V1.6 componentlist.xlsx

http://sitosite.dk/amps/TSSA V1.6 componentlist.xls

Schematic for the amp is:

http://sitosite.dk/amps/TSSA-01300712.pdf

The PCB layout as interactive PDF:

http://sitosite.dk/amps/TSSA-01080812-pcb.pdf

The assembly instruction will follow shortly.

I would prefer to deliver the modules with all SMT assemblied on the boards. I have tried to sell boards before without SMT assemblied and people did not get them made...

All buys should be mailed to audioparts@sitosite.dk
 
Last edited:
Member
Joined 2004
Paid Member
Sonny
there are a couple of resistors in the BOM named CMF55 with 0,5W... afaik CMF55 has only 0,25W and CMF60 is the equivalent with 0,5W. Is 0,25 sufficent?


Do you have a source for the transistors Q18, Q19?
While KSA1381ESTU is available at Mouser, KSC3503ESTU is stated as discontinued (it is still available in hFE1 D grade, but KSA1381 is only available in E grade...)

Boris
 
diyAudio Chief Moderator
Joined 2002
Paid Member
P.S. Are you a bit unhappy with the bass? Mentioning only great mids and highs in the guide. The analogous 2 stage p2p Nico like SSA has very good bass for instance in my experience. Or is it just against higher power, higher FB other amps of yours?
 
diyAudio Chief Moderator
Joined 2002
Paid Member
If its the Eidolon it took an FM Acoustics prosound genes amp to sing in an installation I did once after it was pushing the owner's Naim Nap 500 to stridency at high SPL times, not an easy speaker at all. TSSA will be great on 93dB+ 4 Ohm or 90dB+ 8 Ohm non quirky Z speakers IMHO.
 
If its the Eidolon it took an FM Acoustics prosound genes amp to sing in an installation I did once after it was pushing the owner's Naim Nap 500 to stridency at high SPL times, not an easy speaker at all. TSSA will be great on 93dB+ 4 Ohm or 90dB+ 8 Ohm non quirky Z speakers IMHO.

Sorry to butt in here; but what if the output devices are doubled or single 16Amp 250Watt devices are used? Driver current may need to be increased slightly.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.