• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Some enclosures and chasises we made

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
RE2207

RE2207, looks so much like RE2205, except the height is 70mm

Outside Dimension:WxHxL = 215x70x228mm (8.46" x 2.76" x 8.94")
Inside Dimension: WxHxL=203.5x62x217mm (8.01" x 2.44" x 8.54")
Material: hard aluminum alloy
thickness: Front 8mm, back 3mm, side 3mm, bottom & top 2mm
finish: brush, hard anodized
net weight: 1.6kg

cutout available for 10pc+ order.
 

Attachments

  • RE2207-1.jpeg
    RE2207-1.jpeg
    29.4 KB · Views: 608
  • RE2207-2.jpeg
    RE2207-2.jpeg
    27.9 KB · Views: 567
  • RE2207-3.jpg
    RE2207-3.jpg
    58.5 KB · Views: 580
REF3208

This is a different type. frontpanels are made of aluminum, the body are sheet steel. body is powder coated, very nice. The benefit of steel is the cost is relatively lower than aluminum. It's can be used for DAC, Preamplifier, Power amplifier and tube gears.

REF3208:
Outside Dimension: WxHxL= 320mm x 80mm x 248mm
Inside Dimension:WxHxL = 315mm x 74mm x 236mm
Frontpanel thickness: 8mm
Back panel thickness: 3mm
body thickness: 1.2mm
material: aluminum (front and back) + Steel (body)
finish: powder coating (body), brush+hard anodized(front and back)
net weight: 3.5kg
 

Attachments

  • REF3207-1.jpg
    REF3207-1.jpg
    32.6 KB · Views: 563
  • REF3207-2.jpg
    REF3207-2.jpg
    36.7 KB · Views: 562
  • REF3207-3.jpg
    REF3207-3.jpg
    40.3 KB · Views: 169
  • REF3207-4.jpeg
    REF3207-4.jpeg
    66.5 KB · Views: 287
Last edited:
RE4302

This is not designed for audio. It's for some sort of communication equipment. But I think no audio DIYer can effort not to being attracted by it, especially for those tube gear players. It's big enough, rigid, super good looking and effortable to everyone.

Outside Size: 430 X 70 X 308
Inside Size:415 X 59 X291
Finish: fine brush, hard anodized
Thickness: F, B, T, B: 8mm, 4mm, 3mm, 3mm
Material: Aluminum
Weight: 4kg
 

Attachments

  • RE4307-1.jpeg
    RE4307-1.jpeg
    60.1 KB · Views: 160
  • RE4307-3.jpeg
    RE4307-3.jpeg
    60.5 KB · Views: 198
  • RE4307-2.jpeg
    RE4307-2.jpeg
    68 KB · Views: 207
  • RE4307-4.jpeg
    RE4307-4.jpeg
    75.1 KB · Views: 195
  • RE4307-5.jpeg
    RE4307-5.jpeg
    52.2 KB · Views: 308
Hi Igor
Thanks for your suggestion. The problem is that I don't have the price when I post the images. The shop are handled by another dept, they are always slower than me. Oddly in the same country some said the website is fast, some said it's slow. I'll pass your concern to the info dept and see what they can do.
 
Hi Natawa

You can tell your friend to contact me by email or phone, We have no problem in sending him a few.

You said RE4105 in your post. I'm assuming it should be RE4015? It's a super good looking enclosure for power amplifiers. But are you sure your friend is willing to bring a 10kg enclosure back for you?
 
Last edited:
I have a suggestion for your website that could help prospective customers choose a case that include heatsinks.

It would be handy if a description of the heatsink was included in the product descriptions. Things such as C/W if available or the dimentions of the sink so the customer could calculate the C/W.



Mark :)

PS. Looking forward to recieving the cases and headphone amp component kit on Monday.
 
:eek::eek::eek:

Just courious how many DIY projects can you have at the same time? Most orders are 2 to 5 different enclosures since I post this topic a few days before.

These enclosures are all bought by an Australian.. Guess what will he build with them? :confused:
 

Attachments

  • DSCN9243.jpg
    DSCN9243.jpg
    121 KB · Views: 490
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.