• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Tube(6N8P/6SN7) + MOSFET Hybrid Hifi Amplifier Kit/Board

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
S

siliconray

Member
Joined 2011
Tube (6N8P/6SN7) + MOSFET Hifi Audio Amplifier Board

This is the second version of 6N8P/6SN7 + mosfet hybrid audio amplifier. The performance is far better than the first version (thanks the help of Kenpeter), THD drops from 0.3% to 0.08%. It is powered by 250VDC, 6.3V AC and ±15 to ±22V DC, Max output power is 10W on 8Ohm.

schematic:
An externally hosted image should be here but it was not working when we last tested it.


Blank PCB
An externally hosted image should be here but it was not working when we last tested it.


Assemblyed board
An externally hosted image should be here but it was not working when we last tested it.
 
S

siliconray

Member
Joined 2011
Part List:

Designator Description Value
C1 Capacitor 0.1u/400V
C2 Electrolytic 330u/450V
C3 Capacitor 0.47u/330V
C4 Capacitor 220p
C8 Capacitor 1u/330V
C11 Electrolytic 6800u/35V
C12 Capacitor 0.1u/50V
C13 Electrolytic 6800u/35V
C14 Capacitor 0.1u/50V
C15 Electrolytic 330u/400V
C16 Electrolytic 47u/250V
D1 Zener Diode 9V-12V
F1 Fuse 3A
FB1 Ferry Bead
J1 Header, 2-Pin 250V Input
J2 Header, 2-Pin Audio In
J3 Header, 2-Pin Filament Power
J4 Header, 2-Pin Speaker
J5 Header, 3-Pin Solid State Power
Q1 N-Channel MOSFET IRFP240
Q2 P-Channel MOSFET IRFP9240
Q3 PNP Bipolar Transistor BC560
R1 Resistor 100k
R2 Resistor 4.7K
R3 Resistor 200k
R4 Resistor 200k
R5 Resistor 2.2k
R6 Resistor 470
R7 Resistor 100k
R8 Resistor 220
R9 Resistor 1.5k
R10 Resistor 1.5k
R11 Resistor 0.2/5W
R12 Resistor 0.2/5W
R13 Resistor 220
T1 Vaccum Tube 6N8P, 6SN7
VR1 Potentiometer 100k
 
Last edited:
A

ashbytub

Member
Joined 2006
HI,
Going to make regulated power supply from
TVR 6V6 Variable Tube Voltage Regulator Bare PCB 180-450V (6V6 12AX7) | eBay

I am going to get 5 more P.C. board and rebuild into
THE AUDIO CYCLOPEDIA 2 edition section 21 power supplies page 1164 + 450V power
ON YOUR P.C. BOARD
V3 IS THE IS THE 6SF5
V2 IS 6AS7
V4 IS 6SL7
I am going to get 5 more P.C. board and rebuild into
The final design of the boards are 4 boards the + 225V power supply TEC 514 scope.
http://bama.edebris.com/manuals/tek/514d/
With V209 a 6SJ7 or 6SF5 V3.
With V210 6AS7 or 12B4-A V2.
With V208 12AX7 V4.
got anybody can make a P.C. BOARD,
ASHBY
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom