• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

DSD-S1 DAC

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
After the great success the first version to V3, design Andrea and Quanghao
Now. I opens this new group buy to produce a new series of DAC, with chip ES9018.

I used 8 x LT3042 replacement for low shunt

LT3042 - 20V, 200mA, Ultralow Noise, Ultrahigh PSRR RF



Quanghao will produce these modules with little gain to promote this product, in the near future this DAC will be sold as a finished product at about 3000$ - 5000$.

This DAC ES9018 module have these features:
All use : LT3042 - 20V, 200mA, Ultralow Noise, Ultrahigh PSRR RF

- separated LT3042 Ultralow Noise for any digital section
- separated LT3042 Ultralow Noise for any analog channel
- remote volume control
- remote mute control
- remote input control
- digital filter control
- microcontroller to remap DAC to share I2S connection with DSD
- Amanero module integrated to have USB input
- Support 44,88,96,192,352,384KHz PCM and DSD to play SACD ISO
- ground isolation from USB module
- On board reference 100MHz Crystek oscillator with a jitter of 0.5psec
- 3 spdif input: coax RCA, Toslink optical and AES/EBU
- optional passive I/V
- 4 row x 20 characters LCD
- 5V LCD
- large dB volume display
- Tranfomer stanby


This options are available and here the new cost:

1) DAC module assembled and tested with all components
- ES9018 chip,
- Crystek 100MHz top performances oscillator (CCHD-950-25-100),
- 7 regulator use 0.8uV LT3042: 6 for ES9018 ( digital + analog supply) + 1 for USB amanero
- All digital connectors
- Controller to change volume, input and other parameters
- 20x4 LCD, with encoder
- Infrared remote command
- Amanero module not included
price 550$

2) Chassie only use for Tube IV:
A. Chassis: 1.2 mm iron, powder coated black,
feet high with 10mm screw the bottom canopy available. Look so beautiful.
2. front: aluminum anodized silver color:
15 mm thickness,
Size: 15 mm x 90 mm x 430 mm
Weight: 4 kg
price 200$

3) PCB IV + PCB supply IV price 60$

4) Tranfomer for tube :
Input: 0-220V
Ouput: 0-12V/ 3A x 1, 0-220V/ 150mA x 1
Weight: 3kg
Price: 60

5) Complete assembled DAC with Tube IV use 4 x 12AU7, the price: 1500$ each.

shipping: I will calculate your specific to different countries, shipping by TNT or Fedexl

Minimum subscription amount is: 10 members.
When enough 10 I will conduct the production.
You are invited to attend
Thank you very much!
 

Attachments

  • DSD ES9018 S1.1.jpg
    DSD ES9018 S1.1.jpg
    176.3 KB · Views: 506
  • LCD 1.PNG
    LCD 1.PNG
    122.9 KB · Views: 171
  • DSD ES9018 S1.5.PNG
    DSD ES9018 S1.5.PNG
    308.1 KB · Views: 174
  • DSD ES9018 S1.4.PNG
    DSD ES9018 S1.4.PNG
    341 KB · Views: 484
  • DSD ES9018 S1.3.PNG
    DSD ES9018 S1.3.PNG
    360.7 KB · Views: 483
  • DSD ES9018 S1.2.PNG
    DSD ES9018 S1.2.PNG
    95.5 KB · Views: 489
  • DSD ES9018 S1.1.PNG
    DSD ES9018 S1.1.PNG
    112.4 KB · Views: 498
  • remote dsd dac.jpg
    remote dsd dac.jpg
    21.3 KB · Views: 163
  • LCD 1.2.PNG
    LCD 1.2.PNG
    114.3 KB · Views: 165
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.