DAC-END 24 (AD1865 NOS DAC )

quanghao · 11:53 PM

DAC-END 24 (AD1865 NOS DAC )

AD1865 is a dac chips with natural sound and inspiring.

ago, Andrea and I had success with DAC-end, now I have upgraded dac-end 16-bit, 24-bit up-end DAC.

it receives the input frequency of 192 KhZ- 24bit and special use Amanero to use USB audio source from your computer.

invited to view some links:
DAC End - the AD1865N-K with single ended vacuum output stage
http://www.diyaudio.com/forums/quang...at-2011-a.html
DAC End 2 - the AD1865N-K with single ended vacuum output stage

DESRICRIPTIONDAC-24

NOS DAC-AD1865- 192Khz

Quanghao-Andrea

Description:

DAC AD1865 unit accept 192KHz input with operate NOS (non-oversampling) mode.

Structure:

Digital input:
1 x coaxial input,
1 x Optical
1 x AES/EBU- Balance in put
1 x USB Amanero
1 x selected in put
1x AD1865
1x Cs8416
1x HQ-01 Transfomer supply: 0-6V*2
Analog output : R IV passive
Digital section : using AD1865 as digital receiver CS8416 + Amanero USB.

DAC module assembled and tested with all components

DAC kit Design construction:

1. NOS (non-oversampling) application
2. 3 x low noise, low Z-out shunt regulator
3. 2 x LT regulator for Digital + USB
4. 4 stages regulation for digital section
6. Audio grade components were used.
7. OSCON capacitors used for digital section
8. The composition resistors Vishay error of 1%,
9. 1 x Transfomer supply: 0-6V *2

PCB size 216 mm x 110 mm, 1.6 mm double sides board with gold plated.

Optional: You are welcome to ask if you have any question on the assembly and more information.
Shall not be reproduced without consent!

mkrochin · 7th December 2014, 07:36 PM

Hi, I'm very, very interested this project including tube output with Lundahl trafos.

zubrze · 10th December 2014, 07:47 AM

This looks like an awesome increment in the DAC-End design. I'm also very interested in buying one of these. Are you selling them yet Quanghao?

quanghao · 14th December 2014, 06:09 AM

Quote:

Originally Posted by zubrze

This looks like an awesome increment in the DAC-End design. I'm also very interested in buying one of these. Are you selling them yet Quanghao?

please see in: http://www.audiodesignguide.com/AD1865v2/index.html

and PCB ll1660 i will make now
thanks

zubrze · 14th December 2014, 11:42 AM

Many thanks Quanhao, I can't wait to get one! When do you think the LL1660 boards will be ready?

goodjingan · 1st January 2015, 01:45 PM

will there be a finished dac in a chassis with 2 vrms output ? how much will it cost ?

Marduker · 8th January 2015, 07:49 AM

This looks like very promising. When that tube output stage board will be avaible ? Thanks.

quanghao · 9th January 2015, 11:16 PM

Quote:

Originally Posted by goodjingan

will there be a finished dac in a chassis with 2 vrms output ? how much will it cost ?

quanghao · 9th January 2015, 11:20 PM

Quote:

Originally Posted by Marduker

This looks like very promising. When that tube output stage board will be avaible ? Thanks.

yes

dac not chip AD 1865 : 300$

Have: 1x USB + board DAC+ 1 seloctor

PCB IV : 30 $
Shiing: 50
thanks

zubrze · 10th January 2015, 08:33 PM

Looks good Quanghao. Any details on the IV boards? Are these the LL1660 version?

Do I understand rightly that your DAC board does not include the AD1865NK Chip? Ebay is full of fakes! Do you know where to get the real thing from? Also, does the Dac-End24 board include the Transformer?

All the best for 2015!

8th January 2015, 07:49 AM	#7
Marduker diyAudio Member Join Date: Oct 2014	DAC This looks like very promising. When that tube output stage board will be avaible ? Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DAC-END The best DAC AD1865- UPDAT 2011	quanghao	Quanghao Audio Design	225	18th September 2020 10:44 AM
FS: AD1865 tube DAC (DAC END)	tassosk	Swap Meet	7	13th October 2012 01:17 PM
My NOS AD1865 DAC	benproiii	Digital Line Level	28	23rd April 2012 12:07 PM
My AD1865 nos dac	purer	Digital Source	10	6th July 2008 04:45 PM
Ad1865 nos dac	purer	Digital Source	2	12th March 2005 12:06 AM

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

7th December 2014, 07:36 PM	#2
mkrochin diyAudio Member Join Date: Sep 2012 Location: Krakow	Hi, I'm very, very interested this project including tube output with Lundahl trafos.

10th December 2014, 07:47 AM	#3
zubrze diyAudio Member Join Date: Jul 2013	This looks like an awesome increment in the DAC-End design. I'm also very interested in buying one of these. Are you selling them yet Quanghao?

14th December 2014, 11:42 AM	#5
zubrze diyAudio Member Join Date: Jul 2013	Many thanks Quanhao, I can't wait to get one! When do you think the LL1660 boards will be ready?

1st January 2015, 01:45 PM	#6
goodjingan diyAudio Member Join Date: Sep 2013	will there be a finished dac in a chassis with 2 vrms output ? how much will it cost ?

10th January 2015, 08:33 PM	#10
zubrze diyAudio Member Join Date: Jul 2013	Looks good Quanghao. Any details on the IV boards? Are these the LL1660 version? Do I understand rightly that your DAC board does not include the AD1865NK Chip? Ebay is full of fakes! Do you know where to get the real thing from? Also, does the Dac-End24 board include the Transformer? All the best for 2015!