diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Multi-Way (https://www.diyaudio.com/forums/multi-way/)
-   -   do i need an enclosure for midrange driver? (https://www.diyaudio.com/forums/multi-way/98742-enclosure-midrange-driver.html)

ironpen45 23rd March 2007 06:29 PM

do i need an enclosure for midrange driver?
 
i have 6 pyle PDMR9 drivers that will have their own signal coming from a crossover. the tweeters, woofers and subwoofers already have their own enclosure and are fed with their own frequency ranged signals also from the crossover.

since the PDMR9's are operating independent of the other drivers, can i just hang them from the ceiling, connect them in series without an enclosure for each one? how these sound?

thanks!

richie00boy 23rd March 2007 06:38 PM

No, you need a baffle to stop wave cancellation.

ironpen45 23rd March 2007 08:16 PM

thanx so much for your reply.

can you tell me more about installing/placing the baffle, or at least point me to a site that will discuss this?

thanx again!

Dick West 23rd March 2007 11:12 PM

Go here for the best source of info about open backed mid ranges.

http://www.linkwitzlab.com/


All times are GMT. The time now is 09:03 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki