diyAudio (
-   Swap Meet (
-   -   Rod Elliot P3a boards stuffed FS! (

Mattyo5 26th September 2006 04:08 PM

Rod Elliot P3a boards stuffed FS!
2 Attachment(s)
I have 4 stereo p3a boards for sale that I have stuffed w/ resistors and most of the semiconductors. The resistors are all hand matched. The caps are FC and polypropylene. All parts are from digikey (except bd140 and bd139 which are from newark). I will also include 10x toshiba 2sc1943 and 20x toshiba 2sc5200 also bought at digikey. PLUS, you'll note that the bd139s and the bd140's are not stuffed in the boards. I'll include plenty to finish the boards. I think c1 is missing on the boards, so you'll have to add your favorite c1 yourself, same with your favorite output resistors. I can email you a copy of the construction article if you purchase these boards. Some of the leads are soldered, some are not. I cannot guarrantee these boards work b/c i have not tested them, though i was very careful as to make sure everything was put in its correct place.

First $150 takes the whole lot. Pic does not include the bd139s and 140s, but the $150 does include them.

FREE USPS PRIORITY SHIP TO LOWER 48 only. paypal only.

soonest i'll be able to get these boards out will be friday

please email me if you are interested.

-Matthew K. Olson

hongrn 26th September 2006 04:14 PM

Hey Matt,

Which Rod Elliott project were these boards from? Thanks.


Mattyo5 26th September 2006 04:17 PM

uh, p3a ...its the 100wpc amplifier boards... they are stereo boards so 4 of these makes 8 channels. :)

my projects are taking a different direction ... so thats why i'm selling these...

hope this helps ;)

-Matthew K. Olson DMD

pinkmouse 26th September 2006 04:17 PM

There's a big clue in the title of the thread. ;)

edit: SNAP!

Mattyo5 26th September 2006 04:18 PM

nice ;)

-Matthew K. Olson DMD

Mattyo5 1st October 2006 08:02 PM


I'll sell just the p3a boards stuffed as is for $100 (ie, none of the output transistors ...but i will include the smaller transistors) including USPS priority ship to USA lower 48.

Rod Elliot sells the p3a boards for $22 each plus ship....

mine are stuffed w/ matched resistors, fc caps and multi turn pots... a significant savings in time and money for someone looking for 8 channels of amplification...

mattyo5 at

-Matthew K. Olson

Mattyo5 3rd October 2006 01:41 AM

Ok, someone has dibs on 2 boards for $50... does someone want the other boards for $50?


-Matthew K. Olson DMD

tktran303 3rd October 2006 10:13 AM

Hi Matt,

Would be you able to ship to Australia?

I've like to buy the other 2x stereo pairs off you for $50.

I can pay with Paypal, and for shipping too.


Mattyo5 3rd October 2006 01:45 PM

dibs taken... sale pending

masood251 9th February 2020 02:45 PM

Please send me its pcb pdf

All times are GMT. The time now is 04:25 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio