diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Solid State (https://www.diyaudio.com/forums/solid-state/)
-   -   NAD 2200 Soft Clip Fault (https://www.diyaudio.com/forums/solid-state/58533-nad-2200-soft-clip-fault.html)

sudbury 5th June 2005 12:27 AM

NAD 2200 Soft Clip Fault
 
Have an NAD 2200 amp. Seems OK, except "soft clip" indicator on front panel is always lit when "soft clip" switch on rear panel is "on". Other than always leaving it "off" does anyone have experience or pointers re this? Presently do not have a schem nor service manual which enhances joy.

TIA for any help.

Leolabs 5th June 2005 11:48 AM

Does your NAD sound different when the indicator is on???

pmharries 11th October 2005 02:43 PM

did you cure soft clipping problem?I am looking for transformer for 2200 dont supose you know were i can get one.regards phil

Rhesusminus 27th October 2005 01:51 PM

It's supposed to be that way.
The switch has three sections, one for each channel (to enable the soft-clipping network) and one to turn on the led permanently.

Rh÷


All times are GMT. The time now is 10:13 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki