diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Pass Labs (https://www.diyaudio.com/forums/pass-labs/)
-   -   Ultimate 4U 500mm Chassis - Who is interested? (https://www.diyaudio.com/forums/pass-labs/360807-ultimate-4u-500mm-chassis.html)

2 picoDumbs 28th September 2020 09:54 AM

Pico's Toxic Masculinity Chassis 4U x 500mm - Who is interested?
 
Just been speaking with Gianluca (Modushop) about doing a 4U 500mm Chassis.

For payment and ordering, follow link

Ricerca - 1HFTOXIC


For those who want to pay by PayPal or Credit Card simply choose "bank transfer" as payment method then send the money to webmaster@modu.it

Please make sure you choose the option "send money to friend or family member". The reason we are doing this is PayPal charges us a very high amount for, especially if the money comes from outside the EU.

Thanks for your understanding and your cooperation.

Back Panel

The IEC cutout on the back panel is compatible with either filtered or non-filtered Schurter power entry modules - Series 6765, FKI, FKH, FKID, FKHD should all fit.


If you're purchasing the Cardas Back Panel then you need to order these parts:

CARDAS PARTS SUPPLIED BY SONICRAFT

Binding posts

Cardas CCGR S Binding Post, Sonic Craft

RCAs SHORT VERSION

Cardas GRFA S RCA, Sonic Craft


RCAs LONG VERSION

Cardas GRFA L RCA, Sonic Craft

XLRs

Cardas CM F XLR Chassis XLR, Sonic Craft

Alternatively you could use Neutrik XLR jacks.


Shorting Pins For XLR's - OPTIONAL

Cardas CGSP, Sonic Craft

If you want to use other RCAs and Binding Posts then choose the back panel with pilot holes.
The XLR cutout is compatible with either Neutrik or Cardas this is common on both back panels


So far the list is:

Blk Dynamite x 2
Savu x 2
Mr Dewk x 2
Pico x 1 (maybe 2 if required to get to 25)
Gary S x 1 (maybe 3 if price is reduced further)
pwagner x 2 (maybe 3 if price is reduced further)
Hey Bill x 1 (maybe 2 if required to get to 25)
Super_BQ x 1 (maybe 2 if required to get to 25)
Mirio x 1 (maybe 2 if required to get to 25)
Ozorfis x 1 (maybe 2 if required to get to 25)
TungstenAudio x 1 (maybe 2 if required to get to 25)
ItsAllInMyHead x 1 (maybe 2 if required to get to 25)
Gnub x 1
Subbu k x 1
hifibluedevil x 1
BrianGasberg x 1
Gerald1951 x1
Cakyol x 1
vvs07 x 1
6L6 x 1
Theodosis O. x 1
Dennis Hui x 1
Kasey197 x 1
Sampsonite x 1
Argos x 1
wg45 x 1
dantwomey x 1
32y0 x 1
Kbergsson x 1
Analogdiy x 1
ggetzoff x 1

AudioSan 28th September 2020 10:56 AM

4U 500mm is a good idea. Makes more sense then a 5U 400mm.
How ever, this can also be done today if you wish. By ordering the part seperat.
1pc 4U frontpanel
1pc 4U rearpanel
4pc vibrationfeets
1 set of bolts and nuts
2pc 500mm top/bottom panels
2pc 4U 300mm sinks
2pc 4U 200mm sinks
4pc 500mm L brackets (those are not listed as spare parts tho).
Some modification to the L brackets would be required. Since there is 2 different sinks there should be a aluminium heatspreader between the sinks and the output devices.

Nisbeth 28th September 2020 11:04 AM

Apologies for the thread-hijack, but if you are talking to Modushop maybe also ask them to do a 4U Mini-dissipante (for monoblock use). As far as I can see the only new components required here are new front and rear panels :)

2 picoDumbs 28th September 2020 11:09 AM

Quote:

Originally Posted by AudioSan (https://www.diyaudio.com/forums/pass-labs/360807-ultimate-4u-500mm-chassis-post6356594.html#post6356594)
4U 500mm is a good idea. Makes more sense then a 5U 400mm.
How ever, this can also be done today if you wish. By ordering the part seperat.

Not everyone wants to do L brackets, and a symmetrical split will be better.

We will get it at a better price if we get 4 people interested compared with just throwing bits and pieces together

AudioSan 28th September 2020 11:18 AM

Of course. But it is a possibility non the less. I bet some would want 3U500mm possibility too. I know i would.

2 picoDumbs 28th September 2020 11:19 AM

Quote:

Originally Posted by Nisbeth (https://www.diyaudio.com/forums/pass-labs/360807-ultimate-4u-500mm-chassis-post6356598.html#post6356598)
Apologies for the thread-hijack, but if you are talking to Modushop maybe also ask them to do a 4U Mini-dissipante (for monoblock use). As far as I can see the only new components required here are new front and rear panels :)

how deep?

2 picoDumbs 28th September 2020 11:20 AM

Quote:

Originally Posted by AudioSan (https://www.diyaudio.com/forums/pass-labs/360807-ultimate-4u-500mm-chassis-post6356602.html#post6356602)
I bet some would want 3U500mm possibility too. I know i would.

Yep, we can include 3U too if you're interested.

AudioSan 28th September 2020 11:23 AM

The depht is only a problem with the 250mm depth. The sinks are the same as for standard dissipante so 200mm, 300mm and 400mm sinks already exist in 4U hight.
So if they do a 4U mini dissipante in 250mm depth, then the 4U500mm dissipante is solved too :) (parts wise i meen). Also. 3U500mm should be peace of cake as modushop already have all the parts needed. 3U250mm sinks they already got for the mini dissipante.

AudioSan 28th September 2020 11:26 AM

pico. I like to build my own chassis. So i just get the parts needed (front panel and sinks). The rest i do myself.

2 picoDumbs 28th September 2020 11:29 AM

Yeah I build everything myself too, literally all of it, all cut and machined myself.
I don't normally purchase from modushop or anyone else cause no one makes what I want.


All times are GMT. The time now is 08:51 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio

Wiki