diyAudio (
-   Multi-Way (
-   -   Proac crossover (

miguelnoda 8th September 2019 05:32 PM

Proac crossover
Hello, can anyone help me .
I have a PROAC EBS and I have replaced the ATC SM75-150 medium with an 8 ohm medium.
I have done some Wilmslow Audio crossover but the result is worse than leaving it original.
I just want to modify this part of the crossover the ATC SM75-150 that comes from 16 ohm and put the new 8 ohm.
I include the original diagram.

Galu 8th September 2019 07:04 PM

Hi! The diagram won't enlarge. Are you able to attach a higher resolution copy?

miguelnoda 8th September 2019 07:29 PM

crossover proac ebs
solved the resolution

Galu 8th September 2019 07:31 PM

To be clear, have you replaced the ATC SM75-150 with the ATC SM75-15008? (The 08 indicates the 8 ohm version.)

miguelnoda 8th September 2019 07:55 PM

The 16ohm media broke down and I bought two 8ohm and I want to adapt them to the original Crossover

Galu 8th September 2019 09:13 PM


Originally Posted by miguelnoda (
The 16ohm media broke down

You mean the 16 ohm mid (or midrange).

Which make and model of 8 ohm replacements did you buy?

miguelnoda 8th September 2019 09:53 PM

the same model but in 8ohm

Galu 9th September 2019 01:15 AM

1 Attachment(s)
Did you try the modified version provided by Dissi back in January 2017?

ATC 75-150 STD

miguelnoda 9th September 2019 02:12 PM

If I tried it but it doesn't convince me at all

Datsun 9th September 2019 02:51 PM

You can simply change the mid-frequency part of the crossover : 50uF/0.65mH - 0.45 mH/4.5uF.

All times are GMT. The time now is 07:43 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio