Mic Cutting Out

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hey folks,

I'm doing a show where I'm having major issues with a mic cutting out. It's the only show of my day that has the issue and I can't recreate it myself.

The mic audio keeps on cutting out for several minutes at a time but I'm still getting a signal as it's showing when I solo it. It's definitely not a mic or cable issue as I have tried replacing both and the rest of the channels on the desk work.

Does anyone know what the issue could be?
 
mute switch problem? fader's in need of cleaning? does tapping/hitting the console cause the condition to change that would indicate bad/cracked solder joints...


loss of signal after PFL means that (according to the block diagram in the manual)means signal loss is after the the eq section and there's not much after that to the ouput...also check inserts jacks on the main outputs
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.