Can some one please draw a me a xover

[youngie]

Hi all can someone please draw a simple guide. With what goes where. I am using the Epos k3. Or a step by step instructions would be great to. I may be asking for to much. But I live in hope. Many thanks lee

 

[PeteMcK]

"I may be asking for to much" - you are, you need to be much more specific about what you're trying to achieve

 

[youngie]

Ok I have contacted Epos. But they do not keep spare xover pcb boards. I have completely messed up the original boards. I was looking for some help to do the xover. With wood and the components. But I don’t know what goes with what. How it should be laid out. What joins with what. Many thanks lee

 

[dtaylo3]

Have they suppled and x-over schematic to you, or do you have the circuit board they came on?

 

[Old'n'Cranky]

as always, why not start by showing us some pics of the crossovers. front and back.
maybe someone will take pity on you and kindly draw up the schematic.

 

[Bill poster]

Epos K3

Crossover pics may help a bit..
Website says a 1st on tweet and 2nd on midbass

 

[youngie]

Epos K3

Crossover pics may help a bit..
Website says a 1st on tweet and 2nd on midbass

 

[chris661]

Okay, so we've got the component values. That's a start.
Ask Epos for a crossover schematic and we're all set.

Chris

 

[youngie]

Okay, so we've got the component values. That's a start.
Ask Epos for a crossover schematic and we're all set.

Chris

this is the diagram Epos have kindly just sent me

 

[youngie]

this is the diagram Epos have kindly just sent me

 

[Lojzek]

Great, now you need only populate the boards with parts. Have you got a second one, the one for the lower woofer?

 

[youngie]

Great, now you need only populate the boards with parts. Have you got a second one, the one for the lower woofer?

Thank you yes I do have a second crossover in the speakers I have not touched them that’s why it’s still working lol. I have all the part from the main board. I just don’t understand what goes here and there many thanks lee

 

[scottjoplin]

Can you read the circuit diagram?

 

[youngie]

Can you read the circuit diagram?

No sorry I know I should off left alone. But I messed up big time now paying the price

 

[youngie]

Can you read the circuit diagram?

No sorry I know I should off left alone. But I messed up big time now paying the price

 

[Lojzek]

If you still have the parts, simply put back as on a photo.

 

[youngie]

I don’t have any spare boards in need to make my own crossover. Many thanks lee

 

[RM]

Can somebody please mow my lawn?

Snigger.

R

 

[turk 182]

what's with needing the board, foil damaged?

if the parts are ok you can wire them point to point or use an old terminal strip or even some copper nails into a thin board to assemble the x-overs.

 

[youngie]

what's with needing the board, foil damaged?

if the parts are ok you can wire them point to point or use an old terminal strip or even some copper nails into a thin board to assemble the x-overs.

Thank you. But where do I start point to point. I know I should off not touched if I never knew how to do it but me be me. Have royally messed up. Many thanks lee