Hi,
The new Sica woofer is used in a kit called Sica Balance II. I don't know if the kit is a good design, but the driver certainly is interesting.
There are also some pictures in the data sheet.
The new Sica woofer is used in a kit called Sica Balance II. I don't know if the kit is a good design, but the driver certainly is interesting.
There are also some pictures in the data sheet.
Last edited:
First time I've seen manufacturers FR measured in a vented box rather than on an IEC baffle or in a totally unsuitable sealed box (looking at you BMS).
I suppose this means that that is as good as it gets but it seems usable up to about 400Hz but that makes a mockery of the stated 89.4dB sensitivity.
I suppose this means that that is as good as it gets but it seems usable up to about 400Hz but that makes a mockery of the stated 89.4dB sensitivity.
I'll show you them in a few days, I'll receive mine Monday the 04 22.
For the measurement of sica website, it show only 1 thing:
- a baffle effect of -6db (the box) - whoo -
I've asked to their R&D the IEC measurement
And these guys have tested the speacker:
Google Traduction
When you read carefully these informations, it show that T&S measured induce a bigger box than expected.
See the test, and the hump at low hand in in box measurement.
The good thing, it show that we could target a 38hz@-3db !!!
For the measurement of sica website, it show only 1 thing:
- a baffle effect of -6db (the box) - whoo -
I've asked to their R&D the IEC measurement
And these guys have tested the speacker:
Google Traduction
When you read carefully these informations, it show that T&S measured induce a bigger box than expected.
See the test, and the hump at low hand in in box measurement.
The good thing, it show that we could target a 38hz@-3db !!!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.