diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Elekit (https://www.diyaudio.com/forums/elekit/)
-   -   AER Driver with DIY Cabinet (https://www.diyaudio.com/forums/elekit/320369-aer-driver-diy-cabinet.html)

vkung 20th March 2018 07:04 AM

AER Driver with DIY Cabinet
 
https://s25.postimg.cc/lehx746un/IMG_3434.jpg

https://s25.postimg.cc/5a10tvivz/IMG_3212.jpg

45 Angle
https://s25.postimg.cc/xa54e5u27/IMG_3213.jpg

https://s25.postimg.cc/4lr7kpmof/IMG_3089.jpg



https://s25.postimg.cc/c2fbw999b/c48...1b977906e9.jpg

https://s25.postimg.cc/wzbk0xezz/e32...182ad50b1b.jpg



https://s04.flagcounter.com/count/hZ...ews_1/flags_1/

Zoran 20th March 2018 07:10 AM

? :)

vkung 20th March 2018 07:22 AM

work in progress...WIP..


https://s25.postimg.cc/c2fbw999b/c48...1b977906e9.jpg

https://s25.postimg.cc/wzbk0xezz/e32...182ad50b1b.jpg

https://s25.postimg.cc/tetx6antr/IMG_3352.jpg

https://s25.postimg.cc/xnyn8g3xr/IMG_3348.jpg

https://s25.postimg.cc/wlogpwsu7/IMG_3349.jpg


https://s25.postimg.cc/gnfqzs6bz/IMG_3350.jpg

https://s25.postimg.cc/8up37tfsf/IMG_3353.jpg

Finished ....https://vimeo.com/262149905

vkung 7th April 2018 08:38 AM

https://s25.postimg.cc/qpwtrsqcf/IMG_3446.jpg

WBT 730.12
https://s25.postimg.cc/y5w3dl6bz/IMG_3444.jpg

https://s25.postimg.cc/y5w3dkqwf/IMG_3440.jpg

https://s25.postimg.cc/8zv56qhwf/IMG_3438.jpg

https://s25.postimg.cc/53htarccf/IMG_3436.jpg

https://s25.postimg.cc/8up37tfsf/IMG_3353.jpg

An externally hosted image should be here but it is no longer accessible. Please upload images instead of linking to them to prevent this.

RolandPSP 7th July 2018 02:09 AM

How do they sound ? Are they worth it ?

I'm currently deciding between aer bd3 and voxativ, would prefer aer though. My biggest concern is the bass, which makes me look to the cube audio drivers, however i'm not sure the midrange is the same.

TomCharles 10th September 2018 12:23 PM

AER
 
Quote:

Originally Posted by RolandPSP (https://www.diyaudio.com/forums/elekit/320369-aer-driver-diy-cabinet-post5482674.html#post5482674)
How do they sound ? Are they worth it ?

I'm currently deciding between aer bd3 and voxativ, would prefer aer though. My biggest concern is the bass, which makes me look to the cube audio drivers, however i'm not sure the midrange is the same.


Dunno about AERs Mine, at great expense, after occasional ten year use, (out of town), both surrounds became powder. One voice coil disintegrated. I only used 1.5 watts SE OTL! Cost to replace cones was also excessive. Bought audionirvana neodiniums, richer more musical result.. at 1/? the price of AER. Play through Oris horns for mid/upper only. You need a separate tranny/D sub. The full rangers struggle down there a bit,. You can then high pass filter them to work only down to 150Hz, easier for the amp too.

adason 10th September 2018 12:49 PM

vkung, can you make frequency response measurements in the room, once finished, on axis, and off axis...

vkung 10th September 2018 09:35 PM

I have no tools to measure the frequency but I trust my ears..

adason 11th September 2018 03:24 AM

I do not :)
To measure is to know.

wlowes 20th October 2019 07:51 PM

AER drivers sound amazing
 
Today I heard AER drivers at the Toronto Audiofest show. Victor had them in a large clear acrylic horn. Really more like an infinite baffle than a horn.

Best sound at the show paired with his Triode kit amp. One of my audio buddies suggested I check out some Wilson Audio speakers. That system was $215k CAD. Junk sound compared to Victor's setup. Sure it would fill a stadium, but sound was compressed and muddled. Victor's room was layers of harmonics delicate and distinct.


All times are GMT. The time now is 03:02 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio

Wiki