• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

CK2III

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
CK2III Sold

CK2III Sold

I have a completed CK2III (Cavalli-Kan Kumisa III headphone amp) board that, for other than initial testing, is brand new. Board was built using parts from AMB's bom. Board has been biased to spec, but I would recommend re-biasing once it is put in a chassis. Build was intended for a balanced system but I decided not to go that route. Note that the transformer is not included. BD139-16 & BD140-16 output transistors were used.
This item has sold
 

Attachments

  • DSCN0889.JPG
    DSCN0889.JPG
    131.2 KB · Views: 436
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.