diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Group Buys (https://www.diyaudio.com/forums/group-buys/)
-   -   Maya R2R Advanced Volume controller (https://www.diyaudio.com/forums/group-buys/289544-maya-r2r-advanced-volume-controller.html)

tvicol 6th April 2016 09:52 AM

Maya R2R Advanced Volume controller
 
I still get emails from people interested in Maya, so here we go. Same prices as on the first GB.

Features:
- R-2R 64 1dB step attenuation
- Android/IOS client for remote control
- infrared remote RC5 protocol with autolearning
- infrared remote NEC protocol for Apple remote (default)
- OLED display
- 4 selectable inputs
- independent volume control for each input - very good for A-B source comparison
- extra low noise ground separation between digital and analog circuitry
- inrush current protection
- soft start with speaker protection
- soft turn off with speaker protection
- plate voltage delay for tube pre/amplifiers
- temperature display and monitoring
- temperature protection
- serial I2C bus for unlimited channel extension
- easy direct control and setup with precision optical encoder

Current firmware version is 0.9

More detailed information about Maya is available at vicol audio : MAYA - your ultimate volume-controller
An implementation from first GB Interest check on Vicol Audio Maya R2R Volume controller - Page 12 - diyAudio

Please register here Saligny - Ideal bridge - open till 1st March - Google Sheets

https://www.diyaudio.com/forums/atta...160103_001.jpghttps://www.diyaudio.com/forums/atta...160103_006.jpghttps://www.diyaudio.com/forums/atta...160103_005.jpghttps://www.diyaudio.com/forums/atta...160103_004.jpghttps://www.diyaudio.com/forums/atta...160103_003.jpghttps://www.diyaudio.com/forums/atta...160103_002.jpg

Regards,
Tibi

aradan 6th April 2016 03:44 PM

HI Tibi, I am thinking about the digital crossover version 6 way. As I have already got a balanced version can I order an extra stereo board only?

And another question, can the balanced board be used as 2x stereo?

Sent from my ONE A2003 using Tapatalk

tvicol 6th April 2016 03:50 PM

aradan,

Yes on both questions.

Regards,
Tibi

aradan 6th April 2016 03:54 PM

Thank you!

Added

Sent from my ONE A2003 using Tapatalk

buzzforb 12th April 2016 10:18 PM

What is the time frame on this?

tvicol 13th April 2016 06:26 AM

Quote:

Originally Posted by buzzforb (https://www.diyaudio.com/forums/group-buys/289544-maya-r2r-advanced-volume-controller-post4680778.html#post4680778)
What is the time frame on this?

I'll keep it open for entire April.
10 units are ready for shipping, more units will be available in May.

Regards,
Tibi

Alarudin 24th April 2016 12:35 AM

Bruno Putzeys Balanced Preamp
 
Hi Tibi,

I've seen some discussion about using your volume controller for Bruno Putzeys Balanced Preamp which I'm very interested. Will this be the thing I should be buying or it wouldn't work without some serious modification to the preamp board. Appreciate your information on this. And I assume I should order a balanced set.

Thanks.

Regards,
Askae

tvicol 24th April 2016 06:34 AM

Hi Askae,

Maya can be integrated with Bruno Putzeys Balanced Preamp as it is. No modifications needed.
For BPBP you need a balanced set.

Regards,
Tibi

pixelpusher 26th April 2016 08:14 PM

Quote:

Originally Posted by Alarudin (https://www.diyaudio.com/forums/group-buys/289544-maya-r2r-advanced-volume-controller-post4691669.html#post4691669)
Hi Tibi,

I've seen some discussion about using your volume controller for Bruno Putzeys Balanced Preamp which I'm very interested. Will this be the thing I should be buying or it wouldn't work without some serious modification to the preamp board. Appreciate your information on this. And I assume I should order a balanced set.

Thanks.

Regards,
Askae

You would only need one board but, a word of caution here. BPBP uses the volume control in the feedback loop of the OP amp. See discussion.

zdr 27th April 2016 07:36 AM

Isn't this a bit too expensive? Ok, it's a very nice project if you want a real professional result, but I managed to get similar functionality with following part list available from ebay:

1) arduino nano clone: 2eur
2) 4 channel relay board with optocouplers: 2eur
3) LCD 1602: 1.5 eur (4.2 eur for OLED graphic display)
4) IR remote with sensor: 1.5 eur.
5) headers, cables, resistors, etc: 2 eur.

I still need to integrate LDR into this, but I don't expect total to be more than 20 eur.


All times are GMT. The time now is 10:11 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio

Wiki