diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Tubes / Valves (https://www.diyaudio.com/forums/tubes-valves/)
-   -   Single triode instead of double triode? (https://www.diyaudio.com/forums/tubes-valves/287030-single-triode-instead-double-triode.html)

Suuup 16th February 2016 05:25 PM

Single triode instead of double triode?
 
I have a Feliks Elise amplifier. It uses 2x 6AS7G (double triodes) as power tubes. The two triodes in each tube are wired in series, so 2 triodes for each channel.

I recently bought some 6C33C tubes, which are single triodes. Now I want to make an adapter, so these 6C33C will work in my Elise.

Problem is: I'm not sure how to wire the pins exactly. Should I wire the anode from 6C33C to both 6AS7G anodes, or should I only wire it to one 6AS7G anode and leave the other anode alone? Same question for cathode and grid.

Cheers,
/Mathias


All times are GMT. The time now is 09:39 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio

Wiki